OPERATION
B–64124EN/01
12. GRAPHICS FUNCTION
707
6 Automatic operation is started and machine movement is drawn on
the screen.
MEM
* * * *
* * * * * *
14 : 23 : 03
0001
00012
GRAPHPARAM
Z
XY
S 0T
X 0.000
Y 0.000
Z 0.000
The size of the graphic screen will be as follows:
Gc : Center of the screen
Gc
75mm
120mm
75mm
120mm
Fig. 12.1 (a) Graphic range
As shown in Fig. 12.1 (a), the maximum graphics range is an area of
approx. 144 mm (width) × 90 mm (height).
To draw a section of the program within the actual graphics range, set the
graphics range using one of the following two methods:
1 . Set the center coordinates of the range and the magnification.
2 . Set the maximum and minimum coordinates for the range in the
program.
Whether 1 or 2 is used depends on which parameters are set last. A
graphics range which has been set is retained when the power is turned
off.
Explanation
D RANGE
(Actual graphic range)
D Setting the graphics
range