Series 0i-B/0i Mate-B, Notice of DNC Operation with Memory Card Additional Manual Page 2
Additional Manual
1. Summary
This material describes the notice of DNC Operation with Memory Card on Series 0i-B /
0i Mate-B.
Please refer to the operator’s manual of Series 16i/18i/21i-B concerning general using.
2. Notice
(1) Please use the PCMCIA interface on the control unit. There is no interface on any
display units.
(2) Available software of CNC software
CNC Series of software Available Edition
0i-TB D6A1 02 or later
0i-MB D4A1 02 or later
0i Mate-TB D701 02 or later
0i Mate-MB D501 03 or later
•
•
•
(3) For reliability and security, it is necessary that the structure of cabinet should be
designed by MTB as following points.
Structure that a memory card can be accessed easily even if you don’t open the
door of the cabinet
Dust-proof and waterproof such as any oil does not seep down into the PCMCIA
interface connector
Structure that a memory card can be fixed
Series 0i-B/0i Mate-B
Notice of DNC Operation with Memory Card
EDIT.
FANUC LTD
SHEET
DRAW. NO.
CUST.
TITLE
001/1
DESCRIPTIONDESIG. DATE
01 21.A
p
r.03 K.Ito First issue
Series 0i-B/0i Mate-B
Notice of DNC Operation
with Memor
y
Card
A
-80941E
Contents Summary of Series 0i-B/0i Mate-B, Notice of DNC Operation with Memory Card Additional Manual
- Page 1TECHNICAL REPORT (MANUAL) NO. TMN03/040E Date 2003. Apr. General Manager of CNC Laboratory Series 0i-B/0i Mate-B Notice of DNC Operation with Memory Card 1. Communicate this report to: O Your information O GE Fanuc-N, GE Fanuc-E FANUC Robotics CINCINNATI MILACRON O Machine tool builder Sales agency
- Page 2Series 0i-B/0i Mate-B Notice of DNC Operation with Memory Card 1. Summary This material describes the notice of DNC Operation with Memory Card on Series 0i-B / 0i Mate-B. Please refer to the operator’s manual of Series 16i/18i/21i-B concerning general using. 2. Notice (1) Please use the PCMCIA inter