FS 16i/18i/21i-MB/TB, Expansion of Spindle Functions Supplement to Manual Page 4
Supplement to Manual
EDT
DATE
FANUC Series 16i/18i-TB
Polygonal turning with any spindles
Specifications
A-63549E
3/3
DS0100-04
DESIG.
DESCRIPTION
TITLE
NO.
PAGE
3. Parameters
7640
Master spindle of polygonal turning with two spindles
7641
Slave spindle of polygonal turning with two spindles
[Data type] Byte
[Valid data range] 0,1 to number of spindles,
or m x10+n (m: 1 to number of paths, n: 1 to number of spindles)
Set the master and slave spindles of polygonal turning with two spindles.
Set value 1 to 4 : 1
st
to 4
th
serial spindle of its own path
11 to 14 : 1
st
to 4
th
serial spindle of path1
21 to 24 : 1
st
to 4
th
serial spindle of path2
31 to 32 : 1
st
to 2
nd
serial spindle of path3
If the parameter No.7640 or No.7641 is “0”, the master is 1
st
serial spindle and
the slave is 2
nd
serial spindle of its own path.
Note1) If 2
nd
, 3
rd
or 4
th
serial spindle is master, multi-spindle control option is necessary
to command S code.
Note2) When the parameter No.7640 or No.7641 is changed by the PMC window
function or G10 command, change the parameter before the polygon turning
command G51.2 (G251). If the parameter No.7640 or No.7641 is changed by
the PMC window function before G51.2 (G251), M code to change the
parameter must be preventing buffering (parameter No.3411-).
4. Reference
FANUC Series 16i/18i/21i/160i/180i/210i CONNECTION MANUAL (FUNCTION)
6.11.2 Polygonal Turning with Two Spindles
Contents Summary of FS 16i/18i/21i-MB/TB, Expansion of Spindle Functions Supplement to Manual
- Page 1TECHNICAL REPORT NO.TMN 02/093E Date: 08-November-2002 General Manager of Software Development Center FANUC Series 16i/18i/21i-MB/TB Expansion of spindle functions 1. Communicate this report to : ○ Your information ○ GE Fanuc-N, GE Fanuc-E FANUC Robotics CINCINATI MILACRON ○ Machine tool builder Sal
- Page 2FANUC Series 16i/18i-TB Polygonal turning with any spindles Specifications 1. General...................................................................................2 2. Specification ...........................................................................2 3. Parameters.......................
- Page 31. General This enhancement enables you to select any pair for Polygonal turning with two spindles out of 1st to 4th serial spindles (1st to 3rd serial spindles in case of FS18i). In the case of multi-path control system, two spindles of different paths can be selected. 2. Specification In polygonal
- Page 43. Parameters 7640 Master spindle of polygonal turning with two spindles 7641 Slave spindle of polygonal turning with two spindles [Data type] Byte [Valid data range] 0,1 to number of spindles, or m x10+n (m: 1 to number of paths, n: 1 to number of spindles) Set the master and slave spindles of poly