Change of the specification of servo control card in FS16i/18i/21i/15i/160i/180i/210i/150i/160is/180is/210is-MODEL A/B, FS0i-MODEL B, Power Mate i and R-J3iB Additional Manual Page 2
Additional Manual
Change of the specification of servo control card
Abstract
In FS16i/18i/21i/15i/160i/180i/210i/150i/160is/180is/210is-MODEL A/B, Power Mate i and R-J3iB,
FANUC applied the new servo control card for 6 axes and 8 axes to systems provided from March
2003. And, FANUC will apply the new servo control card for 2 axes, 4 axes and Learning control
to
systems provided from September 2003
in sequence. It is unnecessary to change the order because
the order specification is not changed. But please order this new card in case of ordering the
servo control card itself for maintenance. This new card has upper compatibility and the same
function with the former servo control card. FANUC will stop manufacturing the former servo
control card after this change. Please use this new servo control card for maintenance of the
former one.
②
1. Applied system
Change is applied to the system below.
FS16i/18i/21i/160i/180i/210i/160is/180is/210is-MODEL A/B
②
FS15i/150i-MODEL A/B
FS0i-MODEL B
Power Mate i
R-J3iB
Edit. DATE Design
Description
DRAW. NO.
A-73123EN-086
CUST.
01 03/04/01
New issued Ando
SONE
TITLE
Change of the specification of servo control card in
FS16i/18i/21i/15i/160i/180i/210i/150i/160is/180is/210is
-MODEL A/B, Power Mate i and R-J3iB
SHEET
1 / 4
1-(add
②
), 2, 3, 4/4 Ando
SONE
02 03/06/19
Contents Summary of Change of the specification of servo control card in FS16i/18i/21i/15i/160i/180i/210i/150i/160is/180is/210is-MODEL A/B, FS0i-MODEL B, Power Mate i and R-J3iB Additional Manual
- Page 1TECHNICAL REPORT (MANUAL) NO. TMN03/053E Date 19 Jun., 2003 General Manager of CNC Laboratory Change of the specification of servo control card in FS16i/18i/21i/15i/160i/180i/210i/150i/160is/180is/210is-MODEL A/B, FS0i-MODEL B, Power Mate i and R-J3iB 1. Communicate this report to : ○ Your informati
- Page 2Change of the specification of servo control card Abstract In FS16i/18i/21i/15i/160i/180i/210i/150i/160is/180is/210is-MODEL A/B, Power Mate i and R-J3iB, FANUC applied the new servo control card for 6 axes and 8 axes to systems provided from March ② 2003. And, FANUC will apply the new servo control
- Page 32. Order specification FS16i/18i/21i/160i/180i/210i/160is/180is/210is-MODEL A/B The former The new Axes FSSB Order specification servo control card servo control card A02B-0236-H081 A02B-0236-J124 A02B-0236-J351 ② 2 axes 1ch. A02B-0236-J361 A20B-3300-0243 A20B-3300-0393 A02B-0281-H081 A02B-0281-J081
- Page 4FS15i/150i-MODEL A/B The former The new Axes FSSB Order specification servo control card servo control card ② 2 axes 1ch. A02B-0261-J311 A20B-3300-0243 A20B-3300-0393 A02B-0261-H072 ② 4 axes 1ch. A20B-3300-0242 A20B-3300-0392 A02B-0261-J312 A02B-0261-H073 6 axes 1ch. A20B-3300-0241 A20B-3300-0391 A0
- Page 5② FS0i-MODEL B The former The new Axes FSSB Order specification servo control card servo control card 2 axes 1ch. A02B-0299-H081 A20B-3300-0243 A20B-3300-0393 4 axes 1ch. A02B-0299-H082 A20B-3300-0242 A20B-3300-0392 TITLE CUST. 02 03/06/19 SONE Add this page DRAW. NO. A-73123EN-086 Edit. DATE Design