1. Fanuc
  2. FS 16/18/160/180-MB Concerning the Correction of Rigid Tapping (G84) / Left-handed rigid tapping cycle (G74)

FS 16/18/160/180-MB Concerning the Correction of Rigid Tapping (G84) / Left-handed rigid tapping cycle (G74) Supplement to Manual Page 2

Supplement to Manual
FANUC Series 16/18/160/180-MB OPERATOR'S MANUAL
FANUC Series 16/18 FOR MACHINIG CENTER OPERATOR'S MANUAL
Concerning the correction of Rigid tapping (G84) / Left-handed rigid tapping (G74)
1.Type of applied technical documents
Name
FANUC Series 16/18/160/180-MB OPERATOR'S MANUAL
FANUC Series 16/18 FOR MACHINING CENTER OPERATOR'S MANUAL
Spec.No./Ed. B-62454E/04 , B-61874E/04
2.Summary of Change
Group Name/Outline
New, Add,
Correct,
Delete
Applicable
Date
Basic
Optional
Function
1. The description of "Thread lead" on "14.2.1 Rigi
d tapping (G84)" is replaced.
2. The description of "Thread lead" on "14.2.2
Left-Handed Rigid tapping Cycle (G74)" is replaced.
Correct
Correct
Immediately
Unit
Maintenance
Parts
Notice
Correction
Another
1/2
PAGEEDT.
DATE
DESIGN
DESCRIPTION
TITLE
No.
FANUC Series 16/18-MA/MB
OPERATOR'S MANUAL
Concerning the correction of Rigid tapping(G84)
/ Left-handed rigid tapping(G74)
B-62454E/04-01 B-61874E/04-01
01 02.08.21 T.Inagaki Newly Registered
Previous page
Next page

Contents Summary of FS 16/18/160/180-MB Concerning the Correction of Rigid Tapping (G84) / Left-handed rigid tapping cycle (G74) Supplement to Manual

  • Page 1TECHNICAL REPORT NO.TMN 02/081E Date Aug. 21, 2002 General Manager of Software Development Center FANUC Series 16/18-MA/MB/MC FANUC Series 16i/18i/21i-MA/MB,18i-MB5 FANUC Series 0-M/0i-MA/21-MB/20i-FA Concerning the correction of Rigid tapping (G84) / Left-handed rigid tapping cycle (G74) 1. Communi
  • Page 2FANUC Series 16/18/160/180-MB OPERATOR'S MANUAL FANUC Series 16/18 FOR MACHINIG CENTER OPERATOR'S MANUAL Concerning the correction of Rigid tapping (G84) / Left-handed rigid tapping (G74) 1.Type of applied technical documents FANUC Series 16/18/160/180-MB OPERATOR'S MANUAL Name FANUC Series 16/18 FO
  • Page 3Outline Descriptions are changed as follows. 1. The description of "Thread lead" on "14.2.1 Rigid tapping (G84)" is replaced. 2. The description of "Thread lead" on "14.2.2 Left-Handed Rigid tapping Cycle (G74)" is replaced. Details 1. The description of "Thread lead" on "14.2.1 Rigid tapping (G84)"