FANUC Series 16i/18i/21i-A/B Improvement of Writing the Parameter via PMC Window Specifications Additional Manual Page 1
Additional Manual
Name
FANUC Series 16i/18i/21i-A/B
FANUC Series 16i/18i/21i-A/B
Improvement of writing the parameter via PMC window
Specifications
Contents
In writing the parameter via PMC window, in case of the parameter
WPT=1 (No.8702#4), even if automatic operation is executing, the
following servo parameters can be written.
1. No.2103
2. No.2104
In this improvement, the following parameters can be also written.
1. No.2015
2. No.2021
3. No.2034
4. No.2043
5. No.2044
6. No.2047
7. No.2048
8. No.2069
9. No.2088
10. No.2094
11. No.2095
12. No.2107
13. No.2113
Please refer to the servo parameter manual about details of the
parameters.
Ed.
ApprovalCharge
Page
1/1
Date
2004.6.30
Contents
Making
Improvement of writing the parameter via PMC window
A-79650EN
Nagano
Draw
Contents Summary of FANUC Series 16i/18i/21i-A/B Improvement of Writing the Parameter via PMC Window Specifications Additional Manual
- Page 1FANUC Series 16i/18i/21i-A/B Improvement of writing the parameter via PMC window Specifications Contents In writing the parameter via PMC window, in case of the parameter WPT=1 (No.8702#4), even if automatic operation is executing, the following servo parameters can be written. 1. No.2103 2. No.2104