1. Fanuc
  2. FANUC Series 16i /18i /21i

FANUC Series 16i /18i /21i Additional Manual Page 1

Additional Manual
FANUC Series 16i /18i /21i –MB/TB
Feed-forward / FAD function
enable / disable signal
Specification
- Contents -
1 GENERAL.........................................................................................................................................................2
2 SPECIFICATION...............................................................................................................................................2
3 SIGNALS ..........................................................................................................................................................3
4 REFERENCES..................................................................................................................................................4
1
/
4
Edit
Apprv. Desig.
Sheet
Title
Draw
No.
Date
Design
Descri
p
tion
Date
Dec.13.2004
Sheet
M.Itou
FANUC Series 16i /18i /21 i – MB/TB
Feed-forward / FAD function enable/disable signal
Specification
A-79902E
Previous page
Next page

Contents Summary of FANUC Series 16i /18i /21i Additional Manual

  • Page 1FANUC Series 16i /18i /21i –MB/TB Feed-forward / FAD function enable / disable signal Specification - Contents - 1 GENERAL.........................................................................................................................................................2 2 SPECIFICATION........
  • Page 21. General This is the function that enables feed-forward function or FAD function (fine acceleration / deceleration function) by using PMC signals. 2. Specification When the signal FDFCGx is set to 1, feed-forward or FAD function can be controlled by the signal FDFONx. In case FDFCGx
  • Page 33. Signals Feed-forward / FAD control change signal FDFCG1~8 [Classification] Input signal [Function] Change feed-forward / FAD control from CNC or PMC for each axis [Operation] When FDFCGx is set to 1, feed-forward or FAD function is controlled by the PMC signal FDFONx. When FDFCGx is s
  • Page 44. References - FANUC AC SERVO MOTER alpha i series PARAMETER MANUAL (B-65270EN) - FANUC AC SPINDLE MOTER alpha i series PARAMETER MANUAL (B-65280EN) FANUC Series 16i /18i /21 i – MB/TB Feed-forward / FAD function enable/disable signal Title Specification Draw A-79902E No. Edit Date Design Descripti