Modification of the material of BZ sensor case Additional Manual Page 3

Additional Manual
Draw. No.
Title
Imai
02.11.29
01
PAGE
2 / 2
FANUC LTD.
A-56731E-0093/01
Description
Design
Date
Edit
.
Modification of the material of
BZ sensor case
3. Outline
The material of the BZ sensor case has been changed from metal to plastic. At the
same time, the construction of the sensor, whose filler resin is exposed at the rear end,
has also been changed to the fully closed construction.
The durability of the sensor against coolant is improved by about 2.5 to 4 times with
this modification.
4. Applied BZ sensor
A860-0392-TXXX
(except A860-0392-T083)
5. Modification of outer dimension
6. Modification schedule
The material of the BZ sensor case has been changed since its production in July, 2002.
Note:
The sensor signal output has not been changed. So, it is not necessary to change
cables or parameters.
When it is necessary to loosen
the sensor cramping screw and adjust the position of
the sensor, please check
- the gap between the sensor and the detection ring is more than 0.1mm
- the tightening torque of the sensor cramping screw is 12 kg cm ±10%
after fastening the screw again.
Before modification
After modification
The position of the through
hole for fixing the sensor
holder has not changed.
Metal case sensor Plastic case sensor
Sensor holder
- Outer dimension has been changed.
-
The position of the sensor clamping
screw has been changed.

Contents Summary of Modification of the material of BZ sensor case Additional Manual

  • Page 1TECHNICAL REPORT (MANUAL) No. TMS02/042E Date: December 29, 2002 General Manager of Servo Laboratory Modification of the material of BZ sensor case 1. Distribute this report to the destinations marked with O Your information O GE Fanuc-N, GE Fanuc-E O Fanuc Robotics-NA, Fanuc Robotics-E CINCINNATI M
  • Page 2Modification of the material of BZ sensor case 1. Type of applied technical documents Name Modification of the material of BZ sensor case Spec. No./ Version A-56731E-0093/01 2. Summary of change New, Add Applicable Group Name/Outline Correct, Delete date Basic Function Optional Function Unit Mainten
  • Page 33. Outline The material of the BZ sensor case has been changed from metal to plastic. At the same time, the construction of the sensor, whose filler resin is exposed at the rear end, has also been changed to the fully closed construction. The durability of the sensor against coolant is improved by a