FANUC Series 30i/31i/32i-MODEL A Specification for Machining Data Management Function Additional Manual Page 1
Additional Manual
Contents Summary of FANUC Series 30i/31i/32i-MODEL A Specification for Machining Data Management Function Additional Manual
- Page 1FANUC Series 30i/31i/32i-MODEL A Specification for Machining data management function FANUC Series 30i/31i/32i -MODEL A Title Specification for Machining data management function Draw No. A-90226E Ed. Date Design Description page 1/6 Date Sep.15.’05 Design. Apprv.
- Page 21.1 Machining data management function Overview This function manages the folders that are distinguished by the kind of machining. The machining data can be newly made and selected in machining data management screen. Template folder is installed, and model program can be made into the folder. When
- Page 3Example) - G10 program format for tool offset G10 G90 L10 P1 R1.000 /*Geometry offset for H code*/ G10 G90 L11 P1 R0.001 /*Wear offset for H code*/ G10 G90 L12 P1 R2.000 /*Geometry offset for D code */ G10 G90 L13 P1 R0.002 /*Wear offset for D code*/ - G10 program format for workpiece origin offset
- Page 4Protection function Protection for template folder The template folder is protected by the 8-level data protection function. NOTE To use the function, the 8- level data protection is also necessary. Protection of model program In making machining data folder, it is prohibited to edit specified block
- Page 5Template folder O0001; O0002; G28X0Y0Z0;//read-only Block that is protected in model program X10.Y10.Z10.; X20.Y20.Z20.; //read-only O0003; M30; O0004; Making new folder Machining data folder O0001; O0002; G28X0Y0Z0; //read_only Block that is protected in model program X5.; X10.Y10.Z10.; Block that