1. Fanuc
  2. FS 16i/18i/21i-A/B

FS 16i/18i/21i-A/B Additional Manual Page 5

Additional Manual
2002/07/08
Edit
5
/
5
Data Si
g
nature
Descri
p
tion
FANUC Series 16i/18i/21i-A/B
Dual display of CNC screen display function
A
-78625EN
Drawing No.
Title
Page
Ka
g
e
y
ama
4. DI/DO
No. #7 #6 #5 #4 #3 #2 #1 #0
G0295
CNCKY C2SEND
[Classification] Input signal
[Function]
CNCKY This signal selects input key for dual display of CNC screen display
function
0 : Input is used by PC key.
1 : Input is used by CNC key.
C2SEND This signal requests break of dual display of CNC screen display
function.
0 : Not request.
1 : Request.
No. #7 #6 #5 #4 #3 #2 #1 #0
F0296
CNCKYO C2SENO C2SENE
[Classification] Output signal
[Function]
CNCKYO This signal shows a status of input key for dual display of CNC screen
display function
0 : Input key is controlled by PC.
1 : Input key is controlled by CNC.
C2SENO This signal shows a result of break request of dual display of CNC
screen display function.
0 : Break request is not completed yet.
1 : Break request is completed normally.
C2SENE This signal shows a result of break request of dual display of CNC
screen display function.
0 : Break request is not completed yet.
1 : Break request is not completed normally.
Previous page
Next page

Contents Summary of FS 16i/18i/21i-A/B Additional Manual

  • Page 1FANUC Series 16i/18i/21i-A/B Dual screen of CNC screen display function Specifications Title FANUC Series 16i/18i/21i-A/B Dual display of CNC screen display function Drawing No. A-78625EN Page Edit Data Signature Description 1/5 2002/07/08 Kageyama
  • Page 2Contents 1. Outline ........................................................................................................3 2. Detail...........................................................................................................3 2-1. Selection of Key control...........................
  • Page 31. Outline In CNC screen display function, screen can be displayed on both PC side and CNC side. 2. Detail In CNC screen display function, screen can be displayed on both PC side and CNC side. This function is performed by a parameter NS2(No.3206#7). 2-1. Selection of Key control The key input can b
  • Page 43. Parameter No. #7 #6 #5 #4 #3 #2 #1 #0 3206 NS2 S2K Data type : Bit NS2 Dual display of CNC screen display function is 0: Invalid. 1: Valid. S2K In dual display of CNC screen display function, 0: Key control is selected by DI signal(G0295#7). 1: Key control is selected by pushing at left upper cor
  • Page 54. DI/DO No. #7 #6 #5 #4 #3 #2 #1 #0 G0295 CNCKY C2SEND [Classification] Input signal [Function] CNCKY This signal selects input key for dual display of CNC screen display function 0 : Input is used by PC key. 1 : Input is used by CNC key. C2SEND This signal requests break of dual display of CNC scr
  • Page 65. Notes (1) Fast Ethernet board is needed. (2) PMC-SB6 is needed on F16i/18i/21i-A. PMC-SB7 is needed on F21i-B. (3) Ethernet function and CNC screen display function are needed. (4) Break request is only performed on dual display of CNC screen display function. (5) This function is optional functi