Changing of specification in the processing nozzle Additional Manual Page 1
Additional Manual
TECHNICAL REPORT
NO.TML 00/007E
Date 14 July, 2000
General Manager of
Laser Laboratory
Changing of specification in the processing nozzle
1. Communicate this report to:
○
Your information
○
GE FANUC-NA, GE FANUC-E
○
FANUC Robotics
CINCINNATI MILACRON
○
Machine tool builder
Sales agency
End user
2. Summary for Sales Documents
3. Notice
The specification will be changed in the processing nozzle.
4. Attached Document
Drawing
NO.
Ａ－６３６１８Ｅ－５５０
５．Registration of Order List data(In case of Order List)
Type of data
Lotus 123/Win ・ Oasys ・ Excel
NO. LL-00/ 7025
Date 14 June, 2000
Original section of issue
Person in
Charge
ChiefManager
ＩＤＥ
A.G.M.
Contents Summary of Changing of specification in the processing nozzle Additional Manual
- Page 1TECHNICAL REPORT NO.TML 00/007E Date 14 July, 2000 General Manager of Laser Laboratory Changing of specification in the processing nozzle 1. Communicate this report to: ○ Your information ○ GE FANUC-NA, GE FANUC-E ○ FANUC Robotics CINCINNATI MILACRON ○ Machine tool builder Sales agency End user 2. S
- Page 2Changing of specification in the processing nozzle 【Overview】 The specification will be changed in the processing nozzle which is used in FANUC LASER Y/YP series to be able to make a choice of nozzle tips. 【Changed model】 FANUC LASER Y/YP series basic option Processing nozzle A04B-0850-H300 【In deta
- Page 3Before Specification Outer dimensions Nozzle tip Nozzle tip Remarks specification hole diameter A04B-0850- A290-4600- φD=φ2.0 H300 X255 After Specification Outer dimensions Nozzle tip Nozzle tip Remarks specification hole diameter A04B-0850- A290-4600- φD=φ1.5 H300/D15 X610 Equal to A04B-0850- A290-