UL Designated Marking for FANUC Alpha series SERVO AMPLIFIER Inside the Customer`s Cabinet Additional Manual Page 2

Additional Manual
Putting the UL notice label
for the Alpha series SERVO
1
1
FANUC LTD
A-53866E-385
DescriptionDesig.DateEdit.
01
00.10.26
Shinohara
New Registration
Title
Sheet
Draw. No.
1. GENERAL
FANUC Alpha series SERVO AMPLIFIER has been authorized its compliance to UL/c-UL
marking through UL, a competent third party certification body, i.e. compliance to standards of
UL 508C for the US and C22.2, No. 14 for Canada.
The authorization, though, includes specific markings on the amplifiers additionally to
conventional markings. Those are shown below but there is not enough marking space for them
on each face-plate of the amplifier modules.
Then we decided to ask customers for applying the UL relevant marking label at the inside
wall of machine tool cabinet which employ PSM and other modules, by attaching the label to the
PSM when shipping. Please put the label on the conspicuous location in your control cabinet.
2. CONTENTS OF LABEL
The label to be attached to the PSM is as follows. These contents are applied not only to
PSMs but also SPMs and SVMs.
3. SCHEDULE
The labels will be started being attached to the PSMs in November 2000.
83



 !"
#$%&'()*+,-./012345+,67/
89:;&'<=2;>?
!



@A$6B 4>
@A$6B 4>@A$6B 4>
@A$6B 4>
CDE&'FG!HIJ6KL#$;MN
6B4>(5OPQRS5T/
UV2W#;?
DUVX5E&'YZ[ \NF]^^
4>?\/_`>(aM b$:;(W#;?
NOTICE ON FANUC AMPLIFIERS
Suitable for use on a circuit capable of delivering not more
than 5000 rms symmetrical amperes, 240 V maximum.
(UL testing condition)
! CAUTION - Risk of Electric Shock
1. More than one disconnect switch may be required to
deenergize the equipment before servicing
2. Capacitor discharge time is at least 20 min.
100

Contents Summary of UL Designated Marking for FANUC Alpha series SERVO AMPLIFIER Inside the Customer`s Cabinet Additional Manual

  • Page 1TECHNICAL REPORT (MANUAL) No. TMS00/037E Date: October 30, 2000 General Manager of Servo Laboratory UL Designated Marking for FANUC Alpha series SERVO AMPLIFIER Inside the Customer’s Cabinet 1. Distribute this report to the destinations marked with Ο: Ο Your information Ο GE Fanuc-N, GE Fanuc-E Ο Fa
  • Page 21. GENERAL FANUC Alpha series SERVO AMPLIFIER has been authorized its compliance to UL/c-UL marking through UL, a competent third party certification body, i.e. compliance to standards of UL 508C for the US and C22.2, No. 14 for Canada. The authorization, though, includes specific markings on the am