1. Fanuc
  2. direct input of offset value measured B for the angular axis control

direct input of offset value measured B for the angular axis control Additional Manual Page 1

Additional Manual
01 2000.11.28 Hashimoto Newly Registered
1/3
PAGEEDT.
DATE DESIGN
DESCRIPTION
TITLE
No.
FANUC Series 16
i
/18
i
/21
i
-TA
Direct input of offset value Measured B
for the angular axis control
Specifications
A-78328E
DS0100-04
FANUC Series 16i/18i/21i-TA
Direct input of offset value measured B
for the angular axis control
Specifications
Previous page
Next page

Contents Summary of direct input of offset value measured B for the angular axis control Additional Manual

  • Page 1FANUC Series 16i/18i/21i-TA Direct input of offset value measured B for the angular axis control Specifications DS0100-04 FANUC Series 16i/18i/21i-TA TITLE Direct input of offset value Measured B for the angular axis control Specifications 01 2000.11.28 Hashimoto Newly Registered No. A-78328E EDT. D
  • Page 21. General It is the X-axis or the Z-axis, the angular axis control moves the angular axis, and when the input of tool offset value measured B is measured, the measured tool offset value has the influence by the movement of the angular axis. This function can exclude the traveled distance which is i
  • Page 33. Parameter 5009 QSA [Data type] Bit type QSA The input of tool offset value measured B for the angular axis control function is 0: Disabled. 1: Enabled. DS0100-04 FANUC Series 16i/18i/21i-TA TITLE Direct input of offset value Measured B for the angular axis control Specifications 01 2000.11.28 Has