1. Fanuc
  2. FANUC Series 16i/160i -LB

FANUC Series 16i/160i -LB Additional Manual Page 1

Additional Manual
01 04.09.17
Tokito Newly designed.
Drawing No.
A – 79745E
Tilte
FANUC Series 16i/160i-LB
Parameter setting of special axes for lase
r
machine
Edit
Date Design Recog. Contents Page
1 / 3
FANUC Series 16i/160i -LB
Parameter setting of special axes for laser machine
Specifications
Previous page
Next page

Contents Summary of FANUC Series 16i/160i -LB Additional Manual

  • Page 1FANUC Series 16i/160i -LB Parameter setting of special axes for laser machine Specifications Tilte FANUC Series 16i/160i-LB Parameter setting of special axes for laser machine 01 04.09.17 Tokito Newly designed. Drawing No. A – 79745E Edit Date Design Recog. Contents Page 1/3
  • Page 21. Outline This document describes about the parameter setting of AI contour control / AI-NANO contour control, Feed-forward / Advanced feed-forward, and Positioning by optimal acceleration for FANUC Series 16i /160i -LB. Also the limitation of maximum number of simultaneously controlled axes for Hi
  • Page 3#7 #6 #5 #4 #3 #2 #1 #0 1819 1 - - - - - - - Parameter No.1819#7 In the look-ahead control mode, advanced feed-forward is 0: used. 1: not used. Set this bit to “1”. 2.3. Positioning by optimal acceleration #7 #6 #5 #4 #3 #2 #1 #0 6131 - - - - - - - 0 Parameter No.6131#0 Positioning by optimal accele