1. Fanuc
  2. FANUC Series 16i/18i/21i

FANUC Series 16i/18i/21i Supplement to Manual Page 6

Supplement to Manual
Edit
Apprv.
Desig.
Sheet
TITLE
Draw
No.
Date
Design
Descri
p
tion
Date
FANUC Series 16i/18i/21i –MB, 18i–MB5
Automatic reference position return (G28) improvement
in simple synchronous control axis Specifications
A-90238E
2005.09.30
6
/
6
5 Reference item
Series
16i/18i/21i-
MODEL B
CONNECTION MANUAL
(FUNCTION)
（B – 63523EN-1/02 ）
1.6 SIMPLE SYNCHRONOUS
CONTROL
Series
16i/18i/21i-
MODEL B
CONNECTION MANUAL
(FUNCTION)
（B – 63523EN-1/02 ）
4.4 REFERENCE POSITION
RETURN
Previous page
Next page

Contents Summary of FANUC Series 16i/18i/21i Supplement to Manual

  • Page 1FANUC Series 16i/18i/21i – MB FANUC Series 18i – MB5 Automatic reference position return (G28) improvement in simple synchronous control axis Specifications CONTENTS 1 GENERAL.............................................................................................................................
  • Page 21 General By this function, the automatic reference position return (G28) can be commanded for the simple synchronous control axes without executing the manual reference position return after power-on. FANUC Series 16i/18i/21i –MB, 18i–MB5 TITLE Automatic reference position return (G28) improvement
  • Page 32 Specifications Currently, the alarm No.213 occurs if the automatic reference potion return (G28) is commanded for the simple synchronous control axes whose reference positions are not established. When the parameter SLR (No.8305#4) is set to “1”, the automatic reference position return (G28) is av
  • Page 43 Parameter #7 #6 #5 #4 #3 #2 #1 #0 8305 SLR [Data type] Bit SLR In the simple synchronous control, when the automatic reference position return (G28) for establising the reference positions is commanded before executing the manual reference position return, 0 : Alarm No.213 occurs. 1 : Reference po
  • Page 54 Alarm and message Number Message Description 90 REFERENCE RETURN Automatic reference position return INCOMPLETE (G28) for establishing the reference positions cannot be executed because the reference position of either master axis or slave axis is already established in the simple synchronous cont
  • Page 65 Reference item Series CONNECTION MANUAL 1.6 SIMPLE SYNCHRONOUS 16i/18i/21i- (FUNCTION) CONTROL MODEL B （B – 63523EN-1/02 ） Series CONNECTION MANUAL 4.4 REFERENCE POSITION 16i/18i/21i- (FUNCTION) RETURN MODEL B （B – 63523EN-1/02 ） FANUC Series 16i/18i/21i –MB, 18i–MB5 TITLE Automatic reference posi