Connection about Reactor and Line Filter Additional Manual Page 2
Additional Manual
EDIT.
01
04.03.25
DATE
Suzuki
DESCRIPTION
DESIG.
1st. Edition
TITLE
DRAW.
No.
Connection about Reactor and
Line Filter
A-72562E-0028
FANUC LTD
SHEET
Wrong example 1）
Wrong example 2）
Wrong example 3）
Note
Between the reactor and the Input line regenerative type amplifier, no electrical equipment must
be connected.
There is a possibility that the connected equipment may be damaged and/or malfunction may be
caused on the Input line regenerative type amplifier.
Resistor regenerative
type amplifier (note2)
Resistor regenerative
type amplifier (note2)
Input line regenerative
type amplifier (note1)
The line filter is connected to the
secondary side of the reactor.
There is a possibility that the Resisto
r
regenerative type amplifiers may be
damaged.
A
malfunction may be caused on the
Input line regenerative type amplifier.
Line
Filter
(
note4
)
Reactor
(note3)
Resistor regenerative
type amplifier (note2)
Resistor regenerative
type amplifier (note2)
The Resistor regenerative type
amplifier is connected to the
secondary side of the reactor.
There is a possibility that the Resisto
r
regenerative type amplifiers may be
damaged.
A
malfunction may be caused on the
Input line regenerative type amplifier.
Reactor
(note3)
Input line regenerative
type amplifier (note1)
Input line regenerative
type amplifier (note1)
Some Input line regenerative
type amplifiers are connected to
one line filter.
There is a possibility that the one
Input line regenerative type amplifie
r
may be damaged.
A
malfunction may be caused on the
other Input line regenerative type
amplifier.
Reactor
(note4)
Input line regenerative
type amplifier (note1)
2/3
Contents Summary of Connection about Reactor and Line Filter Additional Manual
- Page 1Connection about reactor and line filter 1. Outline The reactor is used for the input line regenerative type amplifier such as αi PSM, and the line filter is used for the resistor regenerative type amplifier such as βi SVM. And miss-connection of reactor and line filter may cause a damage or malfunc
- Page 2Wrong example 1） Reactor Input line regenerative The Resistor regenerative type (note3) type amplifier (note1) amplifier is connected to the secondary side of the reactor. Resistor regenerative There is a possibility that the Resistor type amplifier (note2) regenerative type amplifiers may be damage
- Page 3（Note 1) Input line regenerative type amplifier α series PSM A06B-6077-HXXX, A06B-6087-HXXX αi series PSM A06B-6110-HXXX βi series SVPM A06B-6134-HXXX etc. （Note 2) Resistor regenerative type amplifier (note2) α series PSMR A06B-6081-HXXX αi series PSMR A06B-6115-HXXX α series SVU A06B-6089-HXXX, α