1. Fanuc
  2. FANUC Series 30i/31i, Spindle Switching Function (Path Table Operation)

FANUC Series 30i/31i, Spindle Switching Function (Path Table Operation) Additional Manual Page 1

Additional Manual
FANUC Series 30i/ 31i
SPINDLE SWITCHING FUNCTION
(Path Table Operation)
Specifications
Contents
1. Outline····················································································· 2
2. Description ··············································································· 2
3. Caution ···················································································· 3
4. Alarm and message ···································································· 3
(Note) Information contained in the specifications is subject to change with the progress of design.
A-90373E
Title
Draw
No.
1/3
Sheet
FANUC Series 30i/ 31i
Spindle Switching Function
(Path Table Operation)
Ed.
Apprv.Desig.
Date
Design
Descri
p
tion
Date
Oct.31.2005
Previous page
Next page

Contents Summary of FANUC Series 30i/31i, Spindle Switching Function (Path Table Operation) Additional Manual

  • Page 1FANUC Series 30i/ 31i SPINDLE SWITCHING FUNCTION (Path Table Operation) Specifications Contents 1. Outline ····················································································· 2 2. Description ··············································································· 2 3. Cauti
  • Page 21. Outline The spindle switching function can realize the spindle control in arbitrary combination of spindle motors and commands to a spindle in Path Table Operation. 2. Description The combination of spindle motors and commands can be switched by the signals of spindle switching function. Basic Sp
  • Page 33. Caution - This function needs the following optional function. - Path Table Operation - Spindle Switching Function - Spindle control function by Cs axis contour control - Cs axis contour control function 4. Alarm and message Number Message Description The spindles motor is doubly selected. SP1250