Change of the Name of Open CNC Other Page 4
Other
EDIT.
SHEE
T
DRAW. NO.
CUST.
T
ITLE
3
/
3
DESCRIPTIONDESIG.DATE
01 01.09.20 Kuma First issue
The Name of Open CNC
A-82374E
4. Model Code in case of HSSB and other company's PC
When CNC side HSSB board is ordered to use with other company's PC, three-
digit model code has been used until now.
From now on, when other company's PC is used as display unit of CNC, two-digit
model name is applied to the CNC system even if the PC is connected to CNC
with HSSB.
Therefore, please make sure to use two-digit model code when order
specifications are input in the host computer.
The model name printed on the unit label is according to this model code.
If wrong model code is input in the host computer, wrong model name is printed
on the unit label.
5. Applicable Time
We ask for instant application.
Contents Summary of Change of the Name of Open CNC Other
- Page 1TECHNICAL REPORT (MANUAL) No.TMN 01 /135E Date. 2001/ . General Manager of Hardware Laboratory The Name of Open CNC 1. Communicate this report to: Your information O GE Fanuc-N, GE Fanuc-E FANUC Robotics CINCINNATI MILACRON O Machine tool builder ( dealt by GE Fanuc only) O Sales agency O End user 2
- Page 2The Name of Open CNC 1. General We will change the definition of Open CNC's name as follows. 2. Definition of Open CNC's Name 1) "FANUC Open CNC" consists of following four types CNC, which are using FANUC PC function, and these model names are expressed with three-digit figures. 1 FANUC Series 160i
- Page 33. Order Specification of CNC Display Unit with Personal Computer Function According to the change of definition mentioned before, we will change the order specification of the basic unit for CNC display unit with personal computer function as follows. Please distinguish it with that of PANEL i (a p
- Page 44. Model Code in case of HSSB and other company's PC When CNC side HSSB board is ordered to use with other company's PC, three- digit model code has been used until now. From now on, when other company's PC is used as display unit of CNC, two-digit model name is applied to the CNC system even if the