1. Fanuc
  2. FANUC Series 30i/31i/32i-MODEL A Output Format Improvement of Custom Macro Variable Data

FANUC Series 30i/31i/32i-MODEL A Output Format Improvement of Custom Macro Variable Data Additional Manual Page 2

Additional Manual
A-79815E
Title
Draw
No.
Ed Date Design Description
Date Nov.09’04 Design. Apprv.
2/5
Page
FANUC Series 30i/31i/32i-MODEL A
Output format improvement of
custom macro variable data
General
The custom macro variable data are output as floating point of IEEE 64bit
data. Therefore, the value of data cannot be confirmed directly as decimal
number.
The number and the value of the macro variable in decimal number can be
output as a comment by setting parameter No.6019#0 after the data usually
output.
Accuracy of the output of the data of the comment is up to 15 digits. The
ranges of output data are eight digits below decimal point and nine digits
above decimal point. When the digits number above the decimal point
exceeds ten, “±OVER FLOW ” is output. When the digits number below
the decimal point exceeds nine, the ninth digit is rounded off.
When the column of "DATA" of the custom macro screen is "DATA
EMPTY", the output becomes "EMPTY".
Previous page
Next page

Contents Summary of FANUC Series 30i/31i/32i-MODEL A Output Format Improvement of Custom Macro Variable Data Additional Manual

  • Page 1FANUC Series 30i/31i/32i-MODEL A Output format improvement of custom macro variable data Specifications FANUC Series 30i/31i/32i-MODEL A Title Output format improvement of custom macro variable data Draw A-79815E No. 1/5 Ed Date Design Description Page Date Nov.09’04 Design. Apprv.
  • Page 2General The custom macro variable data are output as floating point of IEEE 64bit data. Therefore, the value of data cannot be confirmed directly as decimal number. The number and the value of the macro variable in decimal number can be output as a comment by setting parameter No.6019#0 after the da
  • Page 3Output example It is an example of the output MACRO.TXT file as follows. % G10L85P100(FFFFFFFFFFFFFFFF) G10L85P101(FFFFFFFFFFFFFFFF) ～ G10L85P148(FFFFFFFFFFFFFFFF) G10L85P149(FFFFFFFFFFFFFFFF) G10L85P500(41CDCD6500000000) G10L85P501(C1A7D78400000000) G10L85P502(41B3DE4355555555) G10L85P503(C18FCA055
  • Page 4NC (custom macro) screen of output example Fig1.Macro variable（#100～#149） Fig2. Macro variable（#500～#549） Explanation When the custom macro variable of the NC screen in above Figure 1 and Figure 2 is output, the macro variable is output like the output example as shown in the previous page. (No.6001
  • Page 5Parameter #7 #6 #5 #4 #3 #2 #1 #0 6019 MCO [Input type] Parameter input [Data type] Bit system common #0 MCO When data is output, the decimal number value of the macro variable data is 0: Output at the same time as a comment. 1: Not output as a comment. After the number, data, and the variable name