FS 16i/18i/21i-TA/TB/MA/MB, APC reference position preservation function Supplement to Manual Page 1

Supplement to Manual
2002/08/05 T.Inagaki
FANUC Series 16i/18i/21i-TA/TB/MA/MB
APC reference position preservation function
Specifications
1. Specifications .......................................................................................................................................... 2
Outline ..................................................................................................................................................................2
2. Parameter ................................................................................................................................................. 3
A-78895EN
FANUC Series 16i/18i/21i –TA/TB/MA/MB
APC reference position preservation function
Title
Drawing No.
Page
Descri
ptionDate Edit
1/3

Contents Summary of FS 16i/18i/21i-TA/TB/MA/MB, APC reference position preservation function Supplement to Manual

  • Page 1FANUC Series 16i/18i/21i-TA/TB/MA/MB APC reference position preservation function Specifications 1. Specifications .......................................................................................................................................... 2 Outline ....................................
  • Page 21. Specifications Outline In the present circumstances, when memory all clear is executed, APC reference positions are cleared, too. And, to restore SRAM data is the only way to restore APC reference positions. But if the SRAM size is changed, there is no way to restore the SRAM data, so reference p
  • Page 32. Parameter #7 #6 #5 #4 #3 #2 #1 #0 0138 APS [Data type] Bit APS The parameter punch-out for the APC reference position preservation function is: 0: Unavailable. 1: Available. Please set this parameter to '1' for establishing reference position by punched parameter. If this parameter is not set to