1. Fanuc
  2. FANUC Series 16i/18i/21i-B, Specification Cyrillic Alphabet Display

FANUC Series 16i/18i/21i-B, Specification Cyrillic Alphabet Display Additional Manual Page 2

Additional Manual
2
Edit
Apprv.
Apprv.Apprv.
Apprv.Desig.
Desig.Desig.
Desig.
Sheet
Title
Draw
No.
/
7
Date
DateDate
Date
Design
DesignDesign
Design
Descri
p
tion
Descri
p
tionDescri
p
tion
Descri
p
tion
Date
DateDate
Date
FANUC Series16i /18i/21i -B
Cyrillic alphabet display
A
-76572EN
2004.12.06
S.ISOHATA
Addition of method of instructing in G240 K0 2004.12.15
ISOHATA
2
1. Outline
1. Outline1. Outline
1. Outline
The thing to display the Cyrillic alphabet (Russian) can be done in the
conversation macro.
2.
2.2.
2.
Specification
SpecificationSpecification
Specification
The display command of the Cyrillic alphabet is done with G243 (character
display command) as well as a usual character display instruction.
However, there are two kinds of instruction methods, and are a method of
specifying the Cyrillic alphabet code and a method of specifying FANUC
character code. The method of instructing in these is switched by the following
instructions.
G240 Kk ; k=2 :
Cyrillic alphabet display mode ON
(Specification by Cyrillic alphabet code)
k=0 :
Cyrillic alphabet display mode OFF
(Specification by FANUC character code)
Note) Environment operating becomes k=0.
A) For Cyrillic alphabet display mode ON(G240 K2)
Character-code A8,C0-DF is distinguished as a Cyrillic alphabet code as for this
mode inside, and the corresponding Cyrillic alphabet comes to be displayed.
(Refer to the character-code of clause 3 table)
The displayed Cyrillic alphabet is specified bundling the Cyrillic alphabet code
by (" ") (parentheses and double quotation) in the G243 instruction after it
instructs in this G code. Moreover, two or more codes can be specified for one ("
"). (Please delimit it by the blank between the code and the code)
Example 1) When you display Cyrillic alphabet “Б".
G240 K2;
G243 X10. Y10. (“C1”);
Cyrillic alphabet “Б"
Previous page
Next page

Contents Summary of FANUC Series 16i/18i/21i-B, Specification Cyrillic Alphabet Display Additional Manual

  • Page 1FANUC Series 16i /18i /21i - B Specification Cyrillic alphabet display Index 1. Outline 2 2. Specification 2 3. Character- code table 6 4. Correspondence edition 7 Title FANUC Series16i /18i/21i -B Cyrillic alphabet display Draw No. A-76572EN 2 2004.12.15 ISOHATA Addition of method of instructing in
  • Page 21. Outline The thing to display the Cyrillic alphabet (Russian) can be done in the conversation macro. 2. Specification The display command of the Cyrillic alphabet is done with G243 (character display command) as well as a usual character display instruction. However, there are two kinds of instruc
  • Page 3Cyrillic alphabet “Б" is displayed at the position of character coordinate system (10,10) when instructing. Note) Please omit and specify high-ranking '00' when you specify the Cyrillic alphabet code. For instance, it is not correctly displayed when instructing as ("00C1"). Example 2) When instructi
  • Page 4B) For Cyrillic alphabet display mode OFF(G240 K0) The Cyrillic alphabet display mode is turned off after it instructs of this, and character-code A8 and C0-DF are distinguished as not the Cyrillic alphabet code but FANUC character code. (Refer to the character-code of clause 3 table) The method of
  • Page 5Example 1) When you display Cyrillic alphabet “Б" (Cyrillic alphabet display mode ON) The Cyrillic alphabet code of “Б" is C1. (It is 193 in the decimal number) G240 K2; G243 X10. Y10. C193; Example 2) When you display Cyrillic alphabet “A” (Cyrillic alphabet display mode OFF) FANUC character code o
  • Page 63. Character- Character-code table The character-code, which can be used by this function, is the following tables and the melons. Please specify it by the method of displaying usual excluding these characters. Russian character FANUC code Cyrillic code А 41 C0 Б 0FA0 C1 В 42 C2 Г 0FA1 C3 Д 0FA2 C4
  • Page 74. Correspondence edition The series and edition of the macro library to which this function is applied are as follows. A) Library where specification (G240 K2) by Cyrillic alphabet code is possible. FS16i-MB : BZL1-DA FS18i-MB : BZM1-DA FS21i-MB : DZ82-DA FS16i-TB : BZL2-DA FS18i-TB : BZM2-DA FS21i