Change of Design on the 12.1 Additional Manual Page 1

Additional Manual
TECHNICAL REPORT (MANUAL) NO.TMN 04/ 074E
Date Sep. 1, 2004
General Manager of
CNC Laboratory
Series 160i/180i/210i-MODEL A, Series 160is/180is/210is-MODEL B and PANEL i
Change of design on 12.1 LCD units
1.Communicate this report to:
Your information only
GE Fanuc-N, GE Fanuc-E
FANUC Robotics
CINCINNATI MILACRON
Machine tool builder
Sales agency
End user
2.Summary for Sales Documents
3.Notice
4.Attached Document
Drawing
No.
A-85309E
Original section of issue
V. G. M. Department
Manager
Section
Manager
Person in
Charge
FANUC
ADE

Contents Summary of Change of Design on the 12.1 Additional Manual

  • Page 1TECHNICAL REPORT (MANUAL) NO.TMN 04/ 074E Date Sep. 1, 2004 General Manager of CNC Laboratory Series 160i/180i/210i-MODEL A, Series 160is/180is/210is-MODEL B and PANEL i Change of design on 12.1” LCD units 1.Communicate this report to: ○ Your information only ○ GE Fanuc-N, GE Fanuc-E FANUC Robotics
  • Page 2Change of design on the 12.1” LCD units Abstract In Series 160i/180i/210i-MODEL A, Series 160is/180is/210is-MODEL B and PANEL i, FANUC will apply the new 12.1” LCD units to systems provided from September 2004. It is caused the production stoppage by LCD manufacture. The new 12.1” LCD units have ful
  • Page 32) PANELi, Intelligent Terminal Current 12.1” LCD unit New 12.1” LCD unit Order numbers for maintenance for maintenance A08B-0082-B011 A08B-0082-D011 A08B-0082-D015 A13B-0193-B011 A08B-0082-B012 A08B-0082-D012 A08B-0082-D016 A13B-0193-B012 A08B-0082-B013 A08B-0082-D013 A08B-0082-D017 A13B-0193-B013
  • Page 43) FS160is/180is/210is-MODEL B、ROBOSHOT、ROBOCUT Current 12.1” LCD unit New 12.1” LCD unit Order numbers for maintenance for maintenance A13B-0195-B011 A02B-0281-D509 A02B-0281-D515 A13B-0195-B012 A02B-0281-D510 A02B-0281-D516 A13B-0195-B013 A02B-0281-D511 A02B-0281-D517 A07B-0045-H201 A07B-0045-H206