Change of Design on the 12.1 Additional Manual Page 4
Additional Manual
Edit. DATE Design
Description
DRAW. NO.
A-85309E
CUST.
TITLE
Change of design on the 12.1” LCD
units
SHEET
3 / 3
3) FS160is/180is/210is-MODEL B、ROBOSHOT、ROBOCUT
Order numbers
Current 12.1” LCD unit
for maintenance
New 12.1” LCD unit
for maintenance
A13B-0195-B011
A02B-0281-D509 A02B-0281-D515
A13B-0195-B012
A02B-0281-D510 A02B-0281-D516
A13B-0195-B013
A07B-0045-H201
A07B-0045-H206
A07B-0045-H225
A02B-0281-D511 A02B-0281-D517
A02B-0281-H170
A04B-0235-H211
A04B-0235-H212
A04B-0235-H241
A04B-0235-H242
A04B-0236-H211
A04B-0236-H212
A02B-0281-D512 A02B-0281-D525
A02B-0281-H171
A02B-0281-D513 A02B-0281-D526
A02B-0281-H172
A02B-0281-D514 A02B-0281-D527
Contents Summary of Change of Design on the 12.1 Additional Manual
- Page 1TECHNICAL REPORT (MANUAL) ＮＯ．ＴＭＮ ０４／ ０７４Ｅ Date Sep. 1, 2004 General Manager of CNC Laboratory Series 160i/180i/210i-MODEL A, Series 160is/180is/210is-MODEL B and PANEL i Change of design on 12.1” LCD units １．Communicate this report to: ○ Your information only ○ GE Fanuc-N, GE Fanuc-E FANUC Robotics
- Page 2Change of design on the 12.1” LCD units Abstract In Series 160i/180i/210i-MODEL A, Series 160is/180is/210is-MODEL B and PANEL i, FANUC will apply the new 12.1” LCD units to systems provided from September 2004. It is caused the production stoppage by LCD manufacture. The new 12.1” LCD units have ful
- Page 32) PANELi, Intelligent Terminal Current 12.1” LCD unit New 12.1” LCD unit Order numbers for maintenance for maintenance A08B-0082-B011 A08B-0082-D011 A08B-0082-D015 A13B-0193-B011 A08B-0082-B012 A08B-0082-D012 A08B-0082-D016 A13B-0193-B012 A08B-0082-B013 A08B-0082-D013 A08B-0082-D017 A13B-0193-B013
- Page 43) FS160is/180is/210is-MODEL B、ROBOSHOT、ROBOCUT Current 12.1” LCD unit New 12.1” LCD unit Order numbers for maintenance for maintenance A13B-0195-B011 A02B-0281-D509 A02B-0281-D515 A13B-0195-B012 A02B-0281-D510 A02B-0281-D516 A13B-0195-B013 A02B-0281-D511 A02B-0281-D517 A07B-0045-H201 A07B-0045-H206