Change of Design on the 12.1 Additional Manual Page 2
Additional Manual
Edit. DATE Design
Description
DRAW. NO.
A-85309E
CUST.
TITLE
Change of design on the 12.1” LCD
units
SHEET
1 / 3
Change of design on the 12.1” LCD units
Abstract
In Series 160i/180i/210i-MODEL A, Series 160is/180is/210is-MODEL B and PANEL i, FANUC will
apply the new 12.1” LCD units to systems provided from September 2004. It is caused the
production stoppage by LCD manufacture.
The new 12.1” LCD units have fully compatibility as current display units.
There is no need to change the order number of these systems in regard to this change.
The metal plates or cables in the new 12.1” LCD units are not compatible with the current
unit, because a new LCD module is not same as current LCD module about locations of mounting
holes and a connector. For maintenance use, you should order the new 12.1” LCD unit instead
of a single LCD module.
1. Applied system
Change is applied to 12.1” LCD units of the systems below.
1) Series 160i/180i/210i-MODEL A
2) PANEL i, Intelligent Terminal
3) Series 160is/180is/210is-MODEL B
2. Applied period
From now in steps.
3. List of 12.1” LCD units
1) Series 160i/180i/210i-MODEL A
Order numbers
Current 12.1” LCD unit
for maintenance
New 12.1” LCD unit
for maintenance
A02B-0236-B831 to B834
A02B-0238-B831 to B834
A02B-0247-B831, B832
A02B-0247-B835, B836
A02B-0236-D851#P A02B-0236-D852#P
A02B-0236-B851 to B854
A02B-0238-B851 to B854
A02B-0247-B851, B852
A02B-0247-B855, B856
A02B-0236-D851#PS A02B-0236-D852#PS
A02B-0236-B841 to B844
A02B-0238-B841 to B844
A02B-0247-B841, B842
A02B-0247-B845, B846
A02B-0236-D851#PT A02B-0236-D852#PT
01 04.08.31 Yamato New issue.
Contents Summary of Change of Design on the 12.1 Additional Manual
- Page 1TECHNICAL REPORT (MANUAL) ＮＯ．ＴＭＮ ０４／ ０７４Ｅ Date Sep. 1, 2004 General Manager of CNC Laboratory Series 160i/180i/210i-MODEL A, Series 160is/180is/210is-MODEL B and PANEL i Change of design on 12.1” LCD units １．Communicate this report to: ○ Your information only ○ GE Fanuc-N, GE Fanuc-E FANUC Robotics
- Page 2Change of design on the 12.1” LCD units Abstract In Series 160i/180i/210i-MODEL A, Series 160is/180is/210is-MODEL B and PANEL i, FANUC will apply the new 12.1” LCD units to systems provided from September 2004. It is caused the production stoppage by LCD manufacture. The new 12.1” LCD units have ful
- Page 32) PANELi, Intelligent Terminal Current 12.1” LCD unit New 12.1” LCD unit Order numbers for maintenance for maintenance A08B-0082-B011 A08B-0082-D011 A08B-0082-D015 A13B-0193-B011 A08B-0082-B012 A08B-0082-D012 A08B-0082-D016 A13B-0193-B012 A08B-0082-B013 A08B-0082-D013 A08B-0082-D017 A13B-0193-B013
- Page 43) FS160is/180is/210is-MODEL B、ROBOSHOT、ROBOCUT Current 12.1” LCD unit New 12.1” LCD unit Order numbers for maintenance for maintenance A13B-0195-B011 A02B-0281-D509 A02B-0281-D515 A13B-0195-B012 A02B-0281-D510 A02B-0281-D516 A13B-0195-B013 A02B-0281-D511 A02B-0281-D517 A07B-0045-H201 A07B-0045-H206