1. Fanuc
  2. Specification Change of Master PCB for FS 0-C (A-77361E/01)

Specification Change of Master PCB for FS 0-C (A-77361E/01) Additional Manual Page 2

Additional Manual
1. Summary
1. Summary1. Summary
1. Summary
FANUC has a plan to change the Control B type Master PCB in the some controller of
Series 0-C.So the specification number of the Master PCB will be changed.
Control A type Master PCB is already changed.(Technical Report : A-71097E/01)
2. Applied system
2. Applied system2. Applied system
2. Applied system
Applicable system
Series 0-TC, Series 0-TF, Series 0-TTC, Series 0-GSC, Series 0-GCC, Series 0-PC,
and Series 0-MC without the Conversational programming for machining function.
Inapplicable system
Series 0-MF, Series 0-LC, Series 0-L, Series 0-WC, and Series 0-MC with the
Conversational programming for machining function.
3. Specification number change
3. Specification number change3. Specification number change
3. Specification number change
System Current New Remarks
Specification No. A02B-0098-H008 A02B-0098-H018MC,TC,TTC,TF,
GSC,GCC,PC
PCB Number A20B-2001-0065 A20B-2002-0660
4. Applied time
4. Applied time4. Applied time
4. Applied time
It will be shipped since Nov.1998.
5. Notes
5. Notes5. Notes
5. Notes
5.1 Maintenance
Please order and use the same master PCB for the maintenance parts as the current
master PCB that was shipped before.
Number of PCB up to the present Number of PCB for maintenance
A20B-2001-0060 A20B-2001-0060
A20B-2001-0065 A20B-2001-0065
A20B-2002-0660 A20B-2002-0660
EDIT.
FANUC LTD
SHEET
DRAW. NO. CUST.
TITLE
001/2
DESCRIPTIONDESIG.DATE
01 98.09.30 Aizawa First issue
Specification change of
Master PCB (Control B type) for
FANUC Series 0-C
A-77361E/01
Specification change of
Master PCB (Control type B) for
FANUC Series 0-C
Previous page
Next page

Contents Summary of Specification Change of Master PCB for FS 0-C (A-77361E/01) Additional Manual

  • Page 1
  • Page 2Specification change of Master PCB (Control type B) for FANUC Series 0-C 1. Summary FANUC has a plan to change the Control B type Master PCB in the some controller of Series 0-C.So the specification number of the Master PCB will be changed. Control A type Master PCB is already changed.(Technical Rep
  • Page 35.2 Parameter setting It is necessary the parameter related to CPU speed is set to High-speed mode. Do not set to Normal mode. It is not necessary to set the parameter in case of 0-PC, because 0-PC does not have this parameter. T series (TC, TF, TTC, GCC) No.398 bit3 =0 : High-speed mode =1 : Normal