FS 16i-MA/MB Additional Manual Page 4
Additional Manual
2003.9.5
Edit
EditEdit
Edit
4
/
4
Date
DateDate
Date Si
g
nature
Si
g
natureSi
g
nature
Si
g
nature
Descri
p
tion
Descri
p
tionDescri
p
tion
Descri
p
tion
FANUC Series 16
i
–MA/MB
1 path display in 2 path control Sprcifications
A
-79246EN
Drawing No.
Title
Page
3 Signal
Path selection signal (Tool post selectionsignal)
HEAD <G063#0>
[Classification] Input signal
[Function] Selects whether the MDI panel is used for path 1 or path 2.
[Operation] 1: When this signal turned to “1”, operations performed using the MDI
panel are for path 2.
2: When this signal turned to “0”, operations performed using the MDI
panel are for path 1.
Signal address
#7 #6 #5 #4 #3 #2 #1 #0
G063 HEAD
4 Parameter
#7 #6 #5 #4 #3 #2 #1 #0
3193 SDP
[Data type] Bit
SDP In case of 2 path control, the position screen and the program check
screen are
0: 2 path display type.
1: 1 path display type.
NOTE
SDP can be set in case of 2 path control with 10.4
inches LCD.
Contents Summary of FS 16i-MA/MB Additional Manual
- Page 1FANUC Series 16i-MA/MB 1 path display in 2 path control Specifications Contents 1 GENERAL................................ GENERAL ................................................................ ................................................................................................ ........
- Page 21 path display in 2 path control 1 General The position screen and the program check screen become 2 path display type in case of 2 path control with 10.4 inches LCD (Soft key 12 pieces type). This function enables 1 path display type in these screens. 2 Details When parameter SDP (No. 3193 # 1) is
- Page 32 path display (the program check screen) 1 path display (the program screen) Note The alarm screen always become 2 path display type independently of parameter SDP (No. 3193 # 1). Limitation This function is available only in case of 2 path control with 10.4 inches LCD (Soft key 12 pieces type). Ti
- Page 43 Signal Path selection signal (Tool post selectionsignal) HEAD