FANUC Series 16i /18i /21i Additional Manual Page 1
Additional Manual
A-79208E
Edit
Apprv.Desig.
Sheet
Title
Draw
No.
Date
Design
Descri
p
tion
Date
FS16i/18i
/
21i - MB/TB, FS18i-MB5
Improvement of Dual Check Safety function
(Spindle speed alarm detection at safety signal mode A/B)
Specifications
04/01/13
1/4
Sheet
FANUC Series 16i /18i /21i –MB/TB
FANUC Series 18 i –MB5
Improvement of Dual Check Safety function
(Spindle speed alarm detection at safety signal mode A/B)
Specifications
Contents Summary of FANUC Series 16i /18i /21i Additional Manual
- Page 1FANUC Series 16i /18i /21i –MB/TB FANUC Series 18 i –MB5 Improvement of Dual Check Safety function (Spindle speed alarm detection at safety signal mode A/B) Specifications FS16i/18i/21i - MB/TB, FS18i-MB5 Improvement of Dual Check Safety function Title (Spindle speed alarm detection at safety signal
- Page 21. Specification By this function, it is possible to check spindle speed and detect the safety alarms of the spindle axis when the spindle speed is greater than the safe speed even if the guard is closed (safety signal mode is A or B). The spindle using this function can be selected according to the
- Page 34372 Safe speed 1 for each spindle axis 4438 Safe speed 2 for each spindle axis 4440 Safe speed 3 for each spindle axis 4442 Safe speed 4 for each spindle axis [Data type] Word axis (spindle) -1 [Unit of data] min [Valid data range] 0 ~ 32767 Set a safe speed for each spindle axis in terms of motor
- Page 43. Signals Safe speed selection signal A SPA1~SPA4