1. Fanuc
  2. Series 30i-A/31i-A5, 16i-MB/18i-MB5/16i-TB, 15i-MB

Series 30i-A/31i-A5, 16i-MB/18i-MB5/16i-TB, 15i-MB Additional Manual Page 3

Additional Manual
FS30i-A/31i-A5,FS16i-MB/18i-MB5/16i-TB,FS15i-MB Table of the Parameters for 5-Axis Machining Features(A-79370E) 3/10
FANUC Series 30i-A/31i-A5, FANUC Series 16i-MB/18i-MB5/16i-TB, FANUC Series 15i-MB
Table of the Parameters for 5-Axis Machining Features
(1) The parameters for the following 5-axis machining features on FS30i-A/31i-A5, FS16i-MB/18i-MB5/16i-TB and FS15i-MB are described.
Refer to each table(Table<A> - Table<E>) described in each feature.
FS30i-A FS31i-A5 FS16i-MB FS18i-MB5 FS16i-TB FS15i-MB
Tilted working plane command
<Table A>
Tilted working plane command
<Table A>
Tilted working plane
command <Table A>
Tilted working
plane command
A02B-0303-S676 A02B-0306-S676 A02B-0282-S676 A02B-0284-S676
A02B-0298-J959
Tool center point control for 5-axis
machining <Table A>
Tool center point control for 5-axis machining <Table A> Tool center point control for
5-axis machining <Table A>
A02B-0303-S677 A02B-0306-S677 A02B-0282-S677 A02B-0284-S677 A02B-0281-S677 A02B-0298-J958
Tool Center Point Control
<Table E>
Tool center
point control
A02B-0298-J934
Tool radius compensation for 5-axis
machining
<Table A>
Tool radius compensation for 5-axis machining <Table
A> or,
Tool rotation type machine : <Table B>
Rotary table type machine : <Table C>
Mixed-type machine : <Table D>
3-dimensional cutter
compensation <Table B>
A02B-0303-S667 A02B-0306-S667 A02B-0282-S667 A02B-0284-S667 A02B-0281-S667 A02B-0298-J703
Cutter compensation for
Rotary table <Table C>
A02B-0298-J849
3-dim. Cutter compensation
for Rotary Table <Table D>
Tool radius
compensation
A02B-0298-J850
Tool length compensation along tool
direction <Table E>
Tool length compensation along tool
direction <Table E>
Tool length compensation in
tool axis direction
<Table E>
Tool length
compensation
along tool
direction
A02B-0303-S670 A02B-0306-S670 A02B-0282-S670 A02B-0284-S670
A02B-0298-J611
Manual feed for 5-axis machining
<Table A>
Manual feed for 5-axis machining <Table A> 3-dimensional handle feed
<Table E>
Manual feed
A02B-0303-S679 A02B-0306-S679 A02B-0282-S679 A02B-0284-S679 A02B-0281-S679 A02B-0298-J665
Previous page
Next page

Contents Summary of Series 30i-A/31i-A5, 16i-MB/18i-MB5/16i-TB, 15i-MB Additional Manual

  • Page 1FANUC Series 30i-A/31i-A5, FANUC Series 16i-MB/18i-MB5/16i-TB FANUC Series 15i-MB Table of the parameters for 5-axis machining features 1.Type of applied technical documents Name Spec.No./Ed. 2.Summary of Change New, Add, Applicable Group Name/Outline Correct, Date Delete Basic Option Explanation fo
  • Page 23-D cutter compensation, Cutter compensation for rotary table, 3-D cutter compensation for rotary table, Tool length compensation in tool axis direction, 3-D handle feed Unit Maintenance Parts Notice There are many parameters for 5-axis machining features. So, on this document, they are summed up fo
  • Page 3FANUC Series 30i-A/31i-A5, FANUC Series 16i-MB/18i-MB5/16i-TB, FANUC Series 15i-MB Table of the Parameters for 5-Axis Machining Features (1) The parameters for the following 5-axis machining features on FS30i-A/31i-A5, FS16i-MB/18i-MB5/16i-TB and FS15i-MB are described. Refer to each table(Table
  • Page 4(2) The parameters described on each table are used for each applied feature. 2-1) Table A FS30i-A : Tilted working plane command(A02B-0303-S676), Tool center point control for 5-axis machining(A02B-0303-S677), Tool radius compensation for 5-axis machining(A02B-0303-S667), Manual
  • Page 519666 19666 7548 Tool holder offset for tool axis direction tool length compensation 19667 19667 7745 Controlled-point shift vector - 19720 - Axis number of linear axis 1 (Note 1) - 19721 - Axis number of linear axis 2 (Note 1) - 19722 - Axis number of linear axis 3 (Note 1) 19680 19680 6161 Mechani
  • Page 619712 19712 6193 Intersection offset vector between the second and first rotation axes of the tool (X-axis of the basic three axes) 19713 19713 6194 Intersection offset vector between the second and first rotation axes of the tool (Y-axis of the basic three axes) 19714 19714 6195 Intersection offset
  • Page 72-2) Table B FS16i-MB : Tool radius compensation for 5-axis machining(A02B-0282-S667) for Tool rotation type machine / is available when the parameter No.19607#4 is set to “0”. FS18i-MB5 : Tool radius compensation for 5-axis machining(A02B-0284-S667) for Tool rotation ty
  • Page 82-3) Table C FS16i-MB : Tool radius compensation for 5-axis machining(A02B-0282-S667) for Rotary table type machine /
    • is available when the parameter No.19607#4 is set to “0”. FS18i-MB5 : Tool radius compensation for 5-axis machining(A02B-0284-S667) for Rotary table type
  • Page 92-4) Table D FS16i-MB : Tool radius compensation for 5-axis machining(A02B-0282-S667) for Mixed-type machine /
    • is available when the parameter No.19607#4 is set to “0”. FS18i-MB5 : Tool radius compensation for 5-axis machining(A02B-0284-S667) for Mixed-type machine /
  • Page 102-5) Table E FS30i-A : Tool length compensation along tool direction(A02B-0303-S670) FS31i-A5 : Tool length compensation along tool direction(A02B-0306-S670) FS16i-MB : Tool length compensation along tool direction(A02B-0282-S670) FS18i-MB5 : Tool length compensation along tool di