FS30i Additional Manual Page 1

Additional Manual
1
FANUC Series 30i
Enhancement for Feed direction
of Manual Feed for 5-axis machining
Specifications
Ed.
Apprv.
Person
Page
Name No.
Date
Person
Contents
Design
FANUC Series 30i
Enhancement for Feed direction of Manual
Feed for 5-axis machining Specifications
A-79292E
2003.10.28
T.Sasaki S.Ide
FANUC LTD.
/ 4

Contents Summary of FS30i Additional Manual

  • Page 1FANUC Series 30i Enhancement for Feed direction of Manual Feed for 5-axis machining Specifications FANUC Series 30i Name Enhancement for Feed direction of Manual Feed for 5-axis machining Specifications No. A-79292E Ed. Date Design Person 2003.10.28 Person Contents T.Sasaki Apprv. S.Ide FANUC LTD. P
  • Page 21.1 Enhancement for Feed direction of Manual Feed for 5-axis machining General When the paraemter TWD(No.12320#0) is "1", in the mode of Tilted Working Plane command, the Manual Feed for 5-axis machining is executed in the direction of X,Y,Z on the Feature coordinates sytem (the coordinates sytem fo
  • Page 31.1.1 Explanation When the paraemter TWD(No.12320#0) is "1", in the mode of Tilted Working Plane command, the Manual Feed for 5-axis machining is executed in the following directions. ∙ Tool Axis Direction Handle Feed(Interruption) / JOG Feed / Incremental Feed , Table Vertical Direction Handle Feed
  • Page 41.1.2 Parameter #7 #6 #5 #4 #3 #2 #1 #0 12320 TWD [Input type] Setting input [Data type] Bit path #0 TWD In the mode of Tilted Working Plane command, Feed Direction of Manual Feed for 5-axis machining (except for Tool Tip Center Rotation) is 0: the same with the direction in the mode of Non Tilted W