FS30i Additional Manual Page 4
Additional Manual
1.1.2 Parameter
4
Ed.
Apprv.
Person
Page
Name No.
Date
Person
Contents
Design
FANUC Series 30i
Enhancement for Feed direction of Manual
Feed for 5-axis machining Specifications
A-79292E
2003.10.28
T.Sasaki S.Ide
FANUC LTD.
/ 4
#7 #6 #5 #4 #3 #2 #1 #0
12320 TWD
[Input type] Setting input
[Data type] Bit path
# 0 TWD In the mode of Tilted Working Plane command, Feed Direction of Manual
Feed for 5-axis machining (except for Tool Tip Center Rotation) is
0: the same with the direction in the mode of Non Tilted Working Plane
command, that is, the following direction.
Tool axis right-angle direction 1(Table Horizontal Direction 1)
Tool axis right-angle direction 2(Table Horizontal Direction 2)
Tool Axis Direction(Table Vertical Direction)
1: X,Y,Z on the Feature coordinates sytem
Contents Summary of FS30i Additional Manual
- Page 1FANUC Series 30i Enhancement for Feed direction of Manual Feed for 5-axis machining Specifications FANUC Series 30i Name Enhancement for Feed direction of Manual Feed for 5-axis machining Specifications No. A-79292E Ed. Date Design Person 2003.10.28 Person Contents T.Sasaki Apprv. S.Ide FANUC LTD. P
- Page 21.1 Enhancement for Feed direction of Manual Feed for 5-axis machining General When the paraemter TWD(No.12320#0) is "1", in the mode of Tilted Working Plane command, the Manual Feed for 5-axis machining is executed in the direction of X,Y,Z on the Feature coordinates sytem (the coordinates sytem fo
- Page 31.1.1 Explanation When the paraemter TWD(No.12320#0) is "1", in the mode of Tilted Working Plane command, the Manual Feed for 5-axis machining is executed in the following directions. ∙ Tool Axis Direction Handle Feed(Interruption) / JOG Feed / Incremental Feed , Table Vertical Direction Handle Feed
- Page 41.1.2 Parameter #7 #6 #5 #4 #3 #2 #1 #0 12320 TWD [Input type] Setting input [Data type] Bit path #0 TWD In the mode of Tilted Working Plane command, Feed Direction of Manual Feed for 5-axis machining (except for Tool Tip Center Rotation) is 0: the same with the direction in the mode of Non Tilted W