1. Fanuc
  2. Series 30i-MODEL A, Touch Panel Control

Series 30i-MODEL A, Touch Panel Control Additional Manual Page 7

Additional Manual
A-79349E
Title
Draw
No.
Ed. Date Design Description
Date Feb.10.’04 Design. Apprv.
5/5
page
FANUC Series 30i-MODEL A
Touch panel control
Alarm and message
Number Message Description
SR530
3
TOUCH PANEL ERROR
The touch panel is not connected correctly, or
the touch panel cannot be initialized when the
power is turned on. Correct the cause then
turn on the power again.
Caution
CAUTION
1 When all memory (SRAM) data is cleared, the soft
keys on the touch panel are not made usable yet.
In this case, the MDI keys (such as the cursor keys
and page keys) need to be used for setting.
2 When two or more points are pressed at a time, the
pressing of a weighted point determined by
considering how all points are pressed is assumed.
Be sure to press one point only at a time.
This function is optional.
Previous page
Next page

Contents Summary of Series 30i-MODEL A, Touch Panel Control Additional Manual

  • Page 1TECHNICAL REPORT NO. TMN 04/020E Date :Mar .30, 2004 General Manager of Software Laboratory FANUC Series 30i-A Newly additional functions 1. Communicate this report to: Your information only GE Fanuc-N, GE Fanuc-E FANUC Robotics MILACRON Machine tool builder Sales agency End user 2. Summary for Sale
  • Page 2FANUC Series30i –A newly additional functions Drawing number Functions 1 A-79227E External Data Input 2 A-79226E One Touch Macro call 3 A-79196E Temporary absolute coordinate setting 4 A-79354E System alarm 5 A-79349E Touch Panel Control 6 A-79253E Distance coded linear scale interface 7 A-79364E Li
  • Page 3FANUC Series 30i-MODEL A Touch Panel Control Specifications FANUC Series 30i-MODEL A Title Touch panel control Draw A-79349E No. Ed. Date Design Description page 1/5 Date Feb.10.’04 Design. Apprv.
  • Page 4Outline A display unit with a touch panel enables you to operate soft keys by touching the screen. Moreover, an application using a touch panel can be created with the C language executor. - Remarks ・ With a CNC of LCD-mounted type, RS-232C serial port 2 (JD36A) is occupied. ・ With a CNC of stand-al
  • Page 55) Pressing the [TP CAL] soft key displays the touch panel calibration screen for all screens. 6) Press the calibration points (9 points) with a dedicated pen. When a point is pressed correctly, the "+" mark changes to the "Ο" mark. If a "+" mark is not pressed accurately, the message "CALIBRATION P
  • Page 67) After entering the calibration points (9 points), press the key to complete calibration. To cancel calibration or retry, press the key. The screen display returns to the previous screen. If the key is pressed before entering the calibration points (9 points), calibration ope
  • Page 7Alarm and message Number Message Description SR530 TOUCH PANEL ERROR The touch panel is not connected correctly, or 3 the touch panel cannot be initialized when the power is turned on. Correct the cause then turn on the power again. Caution CAUTION 1 When all memory (SRAM) data is cleared, the soft