FS 15i-MA/150i-MA Enhanced Spec. for Step 2 Additional Manual Page 2
Additional Manual
1. Outline
The Step2 of FANUC Series 15i-MA/150i-MA is released.
The following information is described here.
- The features which are added or enhanced in the Step2
- The revisions of the manuals for the specifications of the features
1.1 The series applied for the Step2
(*1) As for the editions of the series, all the features of the Step2 are possible from the
edition.
(*2) Corresponding Software series of Step1 means the series which can be replaced by the
corresponding series of the Step2.
1.2 Corresponding documents
The rough specifications of the features are described on 2. of this report.
As for the specifications in detail, refer to the attached documents prepared for the next
revision of the manuals.
And, as to the revision of the manuals, additions and modifications of the features of the
Step1 for the next revision are also described.
No. Series Software series
(*1)
Corresponding
Software series
of Step1 (*2)
Note
115i-MA/150i-MA F002 F001
215i-MA/150i-MA(MA) F602 F601 For multi-axis
Name
No.
FANUC Series 15i-MA/150i-MA
Enhanced s
p
ecifications
(
Ste
p
2
)
A-77784E/01
Page
1/4
Newly registered
Ver Date Design Description
01 99..05.26 Otsuki
Contents Summary of FS 15i-MA/150i-MA Enhanced Spec. for Step 2 Additional Manual
- Page 1TECHNICAL REPORT (MANUAL) NO.TMN 99/054E Date 1999.May 26 Manager of Next Generation CNC System Development Office FANUC Series 15i –MA / 150i –MA Enhanced specifications for Step2 1. Communicate this report to: O Your information O GE Fanuc-N, GE Fanuc-E FANUC Robotics CINCINNATI MILACRON O Machine
- Page 21. Outline The Step2 of FANUC Series 15i -MA/150i-MA is released. The following information is described here. - The features which are added or enhanced in the Step2 - The revisions of the manuals for the specifications of the features 1.1 The series applied for the Step2 No. Series Software series
- Page 32. Rough specifications of the new and the enhanced features No. Feature Specifications Series MA MA(MA) 1 Power Mate When FANUC Servo Motor β Series (I/O Link Available Available CNC manager Option) is used for additional axes (slave), the data of slave can be displayed and set on CNC side. 2 3-dim
- Page 4No. Feature Specifications Series MA MA(MA) 10 Machining type As for [FINE] [MEDIUM] [ROUGH] on the HPCC Available Available in HPCC screen screen, one of them can be selected by programming programming. 11 Screen hard The information of a screen on CNC can be Available Available copy transformed to
- Page 5No. Feature Specifications Series MA MA(MA) 15 Chopping Setting screen of Chopping is added. Available Available Bottom dead point overshoot damp control is added. As for Chopping, use the software of Step2 or later. (*3) These features are not available with the display unit of 9.5” type C (A02B-02