FS 15i-MA/150i-MA Enhanced Spec. for Step 2 Additional Manual Page 4
Additional Manual
SeriesNo. Feature Specifications
MA MA(MA)
10
Machining type
in HPCC screen
programming
As for [FINE] [MEDIUM] [ROUGH] on the HPCC
screen, one of them can be selected by
programming.
Available Available
11
Screen hard
copy
(*3)
The information of a screen on CNC can be
transformed to the data with the bit map of
640*480 dot and output to a memory card.
Available Available
12
Enhancement
of Data server
Refer to the following document.
“FANUC Ethernet board / DATA SERVER board
OPERATOR'S MANUAL(B-63354EN/02)”
Available Available
13
Enhancement
of axis control
by PMC
The following functions are added to PMC AXIS
CONTROL.
(1) Cutting feed - feed per revolution, with
moving distance specified
(2) Skip - feed per minute, with moving
distance specified
(3) Continuous feed
(4) 1st. reference position return
(5) 2nd. reference position return
(6) 3rd. reference position return
(7) 4th. reference position return
(8) External pulse synchronization (spindle)
(9) Simultaneous multiple-axis operation
(10) Ignoring a separate detector disconnection
alarm
(11) External deceleration for the PMC axis
(12) Diameter/radius programming for the PMC
axis
(13) PMC axis control OT alarm improvement
Available Available
14
Torque
difference alarm
detection for
Synchronous
control
During the synchronous control, the difference of
torque command between master and slave axes
can be observed, and an alarm occurs when it is
unusual.
Available Available
Name
No.
FANUC Series 15i-MA/150i-MA
Enhanced s
p
ecifications
(
Ste
p
2
)
A-77784E/01
Page
3/4
Newly registered
Ver Date Design Description
01 99.05.26 Otsuki
Contents Summary of FS 15i-MA/150i-MA Enhanced Spec. for Step 2 Additional Manual
- Page 1TECHNICAL REPORT (MANUAL) NO.TMN 99/054E Date 1999.May 26 Manager of Next Generation CNC System Development Office FANUC Series 15i –MA / 150i –MA Enhanced specifications for Step2 1. Communicate this report to: O Your information O GE Fanuc-N, GE Fanuc-E FANUC Robotics CINCINNATI MILACRON O Machine
- Page 21. Outline The Step2 of FANUC Series 15i -MA/150i-MA is released. The following information is described here. - The features which are added or enhanced in the Step2 - The revisions of the manuals for the specifications of the features 1.1 The series applied for the Step2 No. Series Software series
- Page 32. Rough specifications of the new and the enhanced features No. Feature Specifications Series MA MA(MA) 1 Power Mate When FANUC Servo Motor β Series (I/O Link Available Available CNC manager Option) is used for additional axes (slave), the data of slave can be displayed and set on CNC side. 2 3-dim
- Page 4No. Feature Specifications Series MA MA(MA) 10 Machining type As for [FINE] [MEDIUM] [ROUGH] on the HPCC Available Available in HPCC screen screen, one of them can be selected by programming programming. 11 Screen hard The information of a screen on CNC can be Available Available copy transformed to
- Page 5No. Feature Specifications Series MA MA(MA) 15 Chopping Setting screen of Chopping is added. Available Available Bottom dead point overshoot damp control is added. As for Chopping, use the software of Step2 or later. (*3) These features are not available with the display unit of 9.5” type C (A02B-02