FS 15i-MA/150i-MA Enhanced Spec. for Step 2 Additional Manual Page 3
Additional Manual
2. Rough specifications of the new and the enhanced features
SeriesNo. Feature Specifications
MA MA(MA)
1
Power Mate
CNC manager
When FANUC Servo Motor β Series (I/O Link
Option) is used for additional axes (slave), the data
of slave can be displayed and set on CNC side.
Available Available
2
3-dimensional
circular
interpolation
By commanding the middle point and the end point,
a circle in the 3-dimensional space can be
interpolated.
Available Available
3
Spindle speed
fluctuation
detection
When the actual spindle rotation speed is out of the
commanded range, an overheat alarm occurs and
the alarm signal is output.
Available Available
4
Program name
48 characters
The program name displayed on the program
directory screen can be extended to 48 characters,
and a program can be searched by the program
name.
Available Available
5
Dual position
feedback
Even a machine which is unstable with full-closed
loop can be controlled with the stable level of semi-
closed loop. Please refer to the manual “FANUC AC
SERVO MOTOR α series PARAMETER MANUAL
(B-65150E/03)”
Available Available
6
Sub screen
(*3)
Additional information can be displayed on current
CNC screens.
Available Available
7
Help function
(*3)
Information on alarms and formats of G codes can
be displayed on CNC screen.
Available Available
8
Directory
display /punch
for each group
On the program directory screen, programs can be
displayed and output with groups.
Available Available
9
Calculation
key
An expression on key input buffer can be calculated
by pushing the calculation key.
SHIFT
ALTER
CALC
Available Available
Name
No.
FANUC Series 15i-MA/150i-MA
Enhanced s
p
ecifications
(
Ste
p
2
)
A-77784E/01
Page
2/4
Newly registered
Ver Date Design Description
01 99.05.26 Otsuki
Contents Summary of FS 15i-MA/150i-MA Enhanced Spec. for Step 2 Additional Manual
- Page 1TECHNICAL REPORT (MANUAL) NO.TMN 99/054E Date 1999.May 26 Manager of Next Generation CNC System Development Office FANUC Series 15i –MA / 150i –MA Enhanced specifications for Step2 1. Communicate this report to: O Your information O GE Fanuc-N, GE Fanuc-E FANUC Robotics CINCINNATI MILACRON O Machine
- Page 21. Outline The Step2 of FANUC Series 15i -MA/150i-MA is released. The following information is described here. - The features which are added or enhanced in the Step2 - The revisions of the manuals for the specifications of the features 1.1 The series applied for the Step2 No. Series Software series
- Page 32. Rough specifications of the new and the enhanced features No. Feature Specifications Series MA MA(MA) 1 Power Mate When FANUC Servo Motor β Series (I/O Link Available Available CNC manager Option) is used for additional axes (slave), the data of slave can be displayed and set on CNC side. 2 3-dim
- Page 4No. Feature Specifications Series MA MA(MA) 10 Machining type As for [FINE] [MEDIUM] [ROUGH] on the HPCC Available Available in HPCC screen screen, one of them can be selected by programming programming. 11 Screen hard The information of a screen on CNC can be Available Available copy transformed to
- Page 5No. Feature Specifications Series MA MA(MA) 15 Chopping Setting screen of Chopping is added. Available Available Bottom dead point overshoot damp control is added. As for Chopping, use the software of Step2 or later. (*3) These features are not available with the display unit of 9.5” type C (A02B-02