Connection Manual FOR Relay module A Additional Manual Page 2
Additional Manual
EDIT DATE DESIG.
TITLE
DESCRIPTION
DRAW NO
A-80035E
SHEET
CUST
2
/
8
1. Overview
Relay
Module A has 10 relays and is used when driving the load of the exceeding the rated current
of the Connector Panel I/O Module
’
s DO. This module is connected to the Terminal module A
“
A03B-0815-C021
”
which the Connector Panel I/O Module is mounted on with a flat cable. And
connect one more this module when all of the Connector Panel I/O Module
’
s 16 points of DO are
used.
2. Total Connection
Note) The first Relay Module A drives 10 relays by 10 points of DO. And the second Relay module A
drives 10 relays by 6 points of DO. (In 2 relays, 1 relay is driven by 1 point of DO. In other 8
relays, 2 relays are driven by 1 point of DO.)
Note) Don
’
t connect the DO used in the Relay module A to Terminal module A side.
Extension Module 3 Terminal module A
Extension Module 1 Terminal module A
Machine side
DI/DO
+24V
Power source
Basic Module Terminal module A
CA52
CA53
CA52
CB150
JD1B
CA52
CA53
CA52
CA53
CB150
X150
XT150A/B
XP1 XP2
Relay Module A Relay module A
XP1
XP1 XP2
XP1 XP2
XP1 XP2
Relay contact
output
XT1 XT1
XT1
XT1
XT1
I/O LINK
JD1A
CB150
CB150
CB150
CB150
CB150
CB150
X150
XT150A/B
X150
XT150A/B
X150
XT150A/B
XP1
XT1
XP1
XT1
XP1
XT1
Extension Module 2 Terminal module A
Relay Module A Relay module A
Relay Module A Relay module A
Relay Module A Relay module A
CNC
Contents Summary of Connection Manual FOR Relay module A Additional Manual
- Page 1Relay Module A Connection Manual -Item- 1. Overview 2. Total Connection 3. Connection of Each Part 3.1 Terminal and Connector Pin Assignment of the Relay Module A. 3.2 Connection of the Relay module A 4. Outline of the Relay Module A 5. Specifications 5.1 Installation Specifications 5.2 Ordering Spe
- Page 21. Overview Relay Module A has 10 relays and is used when driving the load of the exceeding the rated current of the Connector Panel I/O Module’s DO. This module is connected to the Terminal module A “A03B-0815-C021” which the Connector Panel I/O Module is mounted on with a flat cable. And connect o
- Page 3. 3. Connection of Each Part 3.1 Pin Assignment Terminal and Connector pin assignment of the Relay Module A. XT1 XP1 XP2 1 KA1A A01 +24E B01 +24E A01 +24E B01 +24E 2 COM1 3 KA1C A02 B02 A02 B02 4 COM1 5 KA2A A03 B03 Yn+0.2 A03 B03 Yn+1.4 6 COM1 7 KA2C A04 Yn+0.6 B04 Yn+0.0 A04 Yn+1.6 B04 Yn+1.2 8 CO
- Page 43.2 Connection of the Relay Module A Connector Panel I/O Module Terminal Module A CB150 (01) XT150A DC24V Power source (33) +24E (17) V+ 0V DOCOM XT150A,XT150B 0V (1) (16) Relay Module A(#1) Address No. X150 XP1 Bit No. (A24)(B24) (A24)(B24) (A25) (A25) XT150B (20) (21) Yn+0.0 (34) (B04) (B05) KA1 D
- Page 5Note) At Connection parts of the Terminal Module A, means the terminal “XT150B”, means the connector “X150”. Connector Panel I/O Module Terminal Module A Relay Module A(#1) Relay module A(#2) 0V DOCOM(+24E) 0V +24E X150 XP1 XP2 XP1 (A01) (A01) (A01) (A01) (B01) (B01) (B01) (B01) XT1 (A24)(B24) (A24)
- Page 6Relay module A XT1 +24E KA1A (1) COM1 (2) KA1 KA1C (3) COM1 (4) KA2A (5) COM1 (6) KA2 KA2C (7) COM2 (8) COM2 (9) COM3 (10) KA3 KA3A (11) COM3 (12) KA34C (13) COM3 (14) KA4 KA4A (15) COM4 (16) KA5 KA5A (17) COM4 (18) KA56C (19) COM4 (20) KA6 KA6A (21) COM5 (22) COM5 (23) COM6 (24) KA7A (25) COM6 (26)
- Page 7TITLE DRAW NO CUST A-80035E SHEET EDIT DATE DESIG. DESCRIPTION 7/ 8
- Page 84. Outline of the Relay Module A XP1 XP2 Threaded hole for earth (M4) XT1 Unit=mm TITLE DRAW NO CUST A-80035E SHEET EDIT DATE DESIG. DESCRIPTION 8/ 8
- Page 95. Specifications 5.1 Installation Specifications Ambient Temperature At operation 0° to +55°C Storing or transporting -20° to +60°C Temperature Change Max. 1.1°C/min Relative Humidity Normally 75% or less (Relative humidity) Short time (Within one month) 95% or less (Relative humidity) Vibration Op