0i-PB Specifications Additional Manual Page 5
Additional Manual
0i
PB
Item Specifications
○
○
○
Display unit with graphic is required.
☆
○
Display unit with graphic is required.
＊
○
○
○
○
○
○
English
○
Japanese (Chinese character)
○
German/French
○
Italian
○
Chinese (Simplified Chinese)
Display unit with graphic is required.
＊
Spanish
○
Portuguese
○
4 types
○
*1
○
＊
☆
Reader/puncher (Ch.1) interface
○
Reader/puncher (Ch.2) interface
○
*1
☆
☆
○
○
○
Including above 3 items
○
○
○
9999
○
○
1～9999
○
for maintenance
○
○
SNP protocol
☆
FAST Ethernet board is required.
☆
Master/Slave
☆
Master/Slave
☆
☆
Multi-language display
DeviceNet
External program number search
Memory card input/output
External data input
External key input
External machine zero point shift
Interface function
FAST Ethernet
PROFIBUS-DP
External touch panel I/F
Power Mate CNC manager
External program input
Expanded external workpiece number
FL-net
External tool offset
External message
Data input/output
Reader/puncher interface
Data server
DNC2 control
CNC screen display
Erase CRT screen display
Uploading/downloading a part program,
Reading/writing CNC data, Transfer of PMC data,
Memory operation control, etc.
Dual screen of CNC screen display
External workpiece number search
Actual cutting feedrate display
Directory display of floppy cassette
Directory display and punch for each
group
Graphic function
Servo setting screen
Software operator's panel
general purpose switch
Data protection key
Trouble diagnosis
Periodic maintenance screen
Maintenance information screen
Software operator's panel
Servo waveform display
Display of hardware and software
configuration
4 A-80943E/01
Contents Summary of 0i-PB Specifications Additional Manual
- Page 1TECHNICAL REPORT (MANUAL) ＮＯ．ＴＭＮ0３／048E Date June,02 2003 General Manager of CNC Laboratory Series 0i-PB Specifications １．Communicate this report to: O Your information only O GE Fanuc-A, GE Fanuc-E FANUC Robotics CINCINNATI MILACRON O Machine tool builder Sales agency End user ２．Summary for Sales D
- Page 2Specifications for Series 0i -PB 01 Edition ：Standard ●：Standard option ：Option ＊：Function included in another option －：Not available Note) Some combinations of these options are restricted. In case of CNC Display with Personal Computer function, using CNC Screen Display Function is a premise. 0i
- Page 30i Item Specifications PB Interpolation functions Positioning G00 (Linear interpolation type positioning is possible) ○ Exact stop mode G61 ○ Exact stop G09 ○ Linear interpolation ○ Circular interpolation Multi-quadrant is possible ○ Dwell Dwell in seconds ○ Helical interpolation Circular interpolat
- Page 40i Item Specifications PB G code system A/B ○ Pattern function ○ Nibbling G68, G69, M code ○ Pattern base point command G72 ○ Memory and call by A/B macro 5 ○ U/V/W macro ○ Multi-piece machining ○ Command for restarting multi-piece ○ machining Repositioning G75, M code ○ Bending compensation G38, G3
- Page 50i Item Specifications PB Actual cutting feedrate display ○ Directory display of floppy cassette ○ Directory display and punch for each ○ group Graphic function Display unit with graphic is required. ☆ Servo setting screen ○ Servo waveform display Display unit with graphic is required. ＊ Display of
- Page 60i Item Specifications PB Others NC ready, servo ready, automatic operation, automatic operation start lamp, feed hold, reset, NC Status output signal ○ alarm, distribution end, rewinding, inch input, cutting, inposition, thread cutting, tapping, etc. 9" monochrome CRT/MDI ● 7.2" monochrome LCD/MDI
- Page 7Software of personal computer part in case of the CNC system which is connected with personal computer via HSSB(High Speed Serial Bus) Items Specifications Remarks Operating system Windows® 2000 *4 Extended library FOCAS1 *7 CNC basic operation package Option CNC screen display function Option Softw
- Page 8(Note) *1 : There are some limitations in case of CNC Display with Personal Computer Function. *2 : Only for CNC Display with Personal Computer Function. *3 : The actual registrable value might changes according to the registered number of programs and the program si *4 : Intel, Pentium are register