1. Fanuc
  2. QuickTurn Electronic Lathe

QuickTurn Electronic Lathe Connection manual (Hardware) Page 7

Connection manual (Hardware)
QuickTurn™
GFKE-0201B-EN - 7 - GE Fanuc Automation S.A.
3 Hard and Software Used for Connection of Quick Turn
The hardware basis used for connection in this manual is as follows:
0i Mate TB Hardware
• A02B-0301-B801 Basic Unit Stand Alone Type, 1 Slot
• A02B-0301-H201 Main Board PMC-SA1
• A02B-0299-J020 Analog Spindle Module
• A02B-0299-H071 Servo Control Card 2 Axes
• A02B-0299-H047 Memory H, FROM/SRAM, 32M/1
• A02B-0299-H033 Display Control Card for Display Link Unit or Quick Panel
• A02B-0299-H005 CPU Card, DRAM 16MB, 486 Processor
• A02B-0299-H110 Power Supply Unit
0i Mate TB Additional Software Options
• A02B-0301-J888 Macro Executor
• A02B-0301-J738/512K Custom Software Size main CPU, 512kB
• A02B-0301-J685 External Touch Panel Interface
I/O Module
• A20B-2002-0520 I/O Module for Operator’s Panel Input 48, Output 32 with MPG Interface
Manual Pulse Coders
• A860-0203-T001 Manual Pulse Generator
Quick Panel Types Supported
• IC753QMM601 Quick Panel Mini 6 Inch Monochrome Blue Mode
• IC753QMS602 Quick Panel 2000, 6 Inch Monochrome LCD
Servo System
• A06B-0075-B003 Beta 8/3000is, Taper Shaft, Absolute Encoders
• A06B-6130-H002 Servo Amplifier Beta i, SVM1-20i, with FSSB
• A06B-6130-H401 Separate Regenerative Resistor for 4A, 20 A Type Amplifier
All servo systems available for 0i Mate TB are supported by Quick Turn
NOTE
Previous page
Next page

Contents Summary of QuickTurn Electronic Lathe Connection manual (Hardware)

  • Page 1GE Fanuc Automation QuickTurn™ Electronic Lathe Connection Manual GFKE-0201B-EN Software Version0iV1_12 May 2004
  • Page 2QuickTurn™ GFKE-0201B-EN -2- GE Fanuc Automation S.A.
  • Page 3QuickTurn™ Table of Contents 1 PRODUCT DESCRIPTION .......................................................................................................................5 2 APPLICABILITY OF THIS MANUAL..................................................................................................
  • Page 4QuickTurn™ GFKE-0201B-EN -4- GE Fanuc Automation S.A.
  • Page 5QuickTurn™ 1 Product description The Quick Turn is a CNC based control package for simple turning machines, including hardware and software. Product is designed for manual machine concepts and replaces mechanical parts by electronical ones. In this way conventional machining by means of hand wheels,
  • Page 6QuickTurn™ 2 Applicability of this Manual This Manual is a shorted version of Fanuc manual “Fanuc Series 0i Mate Model B Connection Manual Hardware B-63833EN_02”, focussing on most important items for connecting Quick Turn. For any detailed question refer to former mentioned manual. The hardware use
  • Page 7QuickTurn™ 3 Hard and Software Used for Connection of Quick Turn The hardware basis used for connection in this manual is as follows: 0i Mate TB Hardware • A02B-0301-B801 Basic Unit Stand Alone Type, 1 Slot • A02B-0301-H201 Main Board PMC-SA1 • A02B-0299-J020 Analog Spindle Module • A02B-0299-H071 S
  • Page 8QuickTurn™ Spindle • Analog spindle driven by frequency converter available on the marked NOTE All spindles available for 0i Mate TB are supported by Quick Turn Cable Material • A02B-0236-K85* (*= 1, 2, 3, 4, 5, 6) Optical Fiber Cables for Beta I Amplifier Connection • LX660-2007-T010/L*R003 I/O Lin
  • Page 9QuickTurn™ 4 Connector Lay Out 0i Mate TB GFKE-0201B-EN -9- GE Fanuc Automation S.A.
  • Page 10QuickTurn™ 5 Total Connection Diagram 0i Mate TB GFKE-0201B-EN - 10 - GE Fanuc Automation S.A.
  • Page 11QuickTurn™ 6 Connection to the Operators Panel I/O Module GFKE-0201B-EN - 11 - GE Fanuc Automation S.A.
  • Page 12QuickTurn™ GFKE-0201B-EN - 12 - GE Fanuc Automation S.A.
  • Page 13QuickTurn™ GFKE-0201B-EN - 13 - GE Fanuc Automation S.A.
  • Page 14QuickTurn™ GFKE-0201B-EN - 14 - GE Fanuc Automation S.A.
  • Page 15QuickTurn™ GFKE-0201B-EN - 15 - GE Fanuc Automation S.A.
  • Page 16QuickTurn™ GFKE-0201B-EN - 16 - GE Fanuc Automation S.A.
  • Page 17QuickTurn™ GFKE-0201B-EN - 17 - GE Fanuc Automation S.A.
  • Page 18QuickTurn™ GFKE-0201B-EN - 18 - GE Fanuc Automation S.A.
  • Page 19QuickTurn™ GFKE-0201B-EN - 19 - GE Fanuc Automation S.A.
  • Page 20QuickTurn™ GFKE-0201B-EN - 20 - GE Fanuc Automation S.A.
  • Page 21QuickTurn™ GFKE-0201B-EN - 21 - GE Fanuc Automation S.A.
  • Page 22QuickTurn™ GFKE-0201B-EN - 22 - GE Fanuc Automation S.A.
  • Page 23QuickTurn™ GFKE-0201B-EN - 23 - GE Fanuc Automation S.A.
  • Page 24QuickTurn™ GFKE-0201B-EN - 24 - GE Fanuc Automation S.A.
  • Page 25QuickTurn™ GFKE-0201B-EN - 25 - GE Fanuc Automation S.A.
  • Page 26QuickTurn™ GFKE-0201B-EN - 26 - GE Fanuc Automation S.A.
  • Page 27QuickTurn™ GFKE-0201B-EN - 27 - GE Fanuc Automation S.A.
  • Page 28QuickTurn™ 7 Input Signals Address Signal Description Remarks X8.0 Joy Stick + X 0: No Effect 1: Request to Move Axis X8.1 Joy Stick -X 0: No Effect 1: Request to Move Axis X8.2 Joy Stick +Z 0: No Effect 1: Request to Move Axis X8.3 Joy Stick -Z 0: No Effect 1: Request to Move Axis X8.4 Emergency St
  • Page 29QuickTurn™ X10.0 Override 1 X10 bit3 bit2 bit1 bit0 Rotary Switch 0 Æ 0000 Jog/Cycle=0% Rapid=10% (Parameter 1421) X10.1 Override 2 1 Æ 0001 Jog/Cycle=5% Rapid=10% (Parameter 1421) Rotary Switch 2 Æ 0010 Jog/Cycle=10% Rapid=10% (Parameter 1421) 3 Æ 0011 Jog/Cycle=20% Rapid=25% X10.2 Override 3 4 Æ 0
  • Page 30QuickTurn™ 8 Special Keep Relays K0.0 Reference Return Completed Check Bypass 0: Reference Done Checked For Cycle Start 1: Reference Done Not Checked K0.1 Machine Door Closed/Open Switch Bypass 0: Door Switch Checked For Spindle Running 1: Door Switch Not Checked K0.2 Thermic Motor Relay Bypass 0: R
  • Page 31QuickTurn™ 9 Output Signals Address Signal Description Remarks Y0.0 Lubrication Device 0: No Effect 1: Lubrication Device Running Y0.1 Spindle Running CW 0: No Effect (Message if Cycle Start Pressed + Cycle Start Blocked) 1: Spindle Running CW Y0.2 Spindle Running CCW 0: No Effect (Message if Cycle
  • Page 32QuickTurn™ 10 QuickTurn Application Wiring RS232C for DNC Mode and Data I/O JD5A RS232C for Quick Panel Connection JD5B LX660-4024-T030/ 24 VDC Analog Spindle JA40 Spindle Position Coder JA7A Power Supply 24 V CP1 LX660-8024-T010/ I/O Link Cable JD1A LX660-2007-T010/L*R003 Quick Panel Touch Screen S
  • Page 33QuickTurn™ 11 Quickpanel 0i Mate TB Connection Cable Quickpanel CNC SIO (25-Pin) JD5B RS232C(CH.2) GFKE-0201B-EN - 33 - GE Fanuc Automation S.A.
  • Page 34QuickTurn™ 12 Analog Spindle Interface Cable Connection GFKE-0201B-EN - 34 - GE Fanuc Automation S.A.
  • Page 35QuickTurn™ 13 Position Coder Interface GFKE-0201B-EN - 35 - GE Fanuc Automation S.A.
  • Page 36QuickTurn™ 14 Connector Location Beta SVM1-20i GFKE-0201B-EN - 36 - GE Fanuc Automation S.A.
  • Page 37QuickTurn™ 15 Connection Diagram BETA SVM1-20i GFKE-0201B-EN - 37 - GE Fanuc Automation S.A.
  • Page 38QuickTurn™ GFKE-0201B-EN - 38 - GE Fanuc Automation S.A.