B–63284EN/03
8. IMPROVEMENT OF TAPPING
ADDITIONAL FUNCTIONS OF SERIES
BH0M/BH1D/BH2D, BH1E/BH2E/BH3E,
AND BH1F/BH2F/BH3F
599
27106 MILTMR
MILTMR M code specified before reverse milling and tapping
Setting range: 0 to 999
If 0 is set, no M code is output. For two–path systems, this data is set
separately for each tool post.
9294 S1STPM
S1STPM M code for stopping spindle 1
Setting range: 0 to 999
If 0 is set, M5 is output.
9295 S1NMLM
S1NMLM M code for rotating spindle 1 in the normal direction
Setting range: 0 to 999
If 0 is set, M3 is output.
9296 S1RVSM
S1RVSM M code for rotating spindle 1 in the reverse direction
Setting range: 0 to 999
If 0 is set, M4 is output.
9297 S2STPM
S2STPM M code for stopping spindle 2
Setting range: 0 to 999
If 0 is set, M5 is output.
9298 S2NMLM
S2NMLM M code for rotating spindle 2 in the normal direction
Setting range: 0 to 999
If 0 is set, M3 is output.
9299 S2RVSM
S2RVSM M code for rotating spindle 2 in the reverse direction
Setting range: 0 to 999
If 0 is set, M4 is output.
9876 MLSTPM
MLSTPM M code for stopping the milling tool axis
<Related parameter: Bit 1 (MLS) of parameter No. 9774>
Setting range: 0 to 255
If 0 is set, M5 is output. For two–path systems, this data is set separately
for each tool post.