Multi C Executor for FANUC Series16i/18i/21i-MODEL B Supplement to Manual Page 6

Supplement to Manual

Page of 13

/ 13

Edit

Apprv.

Apprv.Apprv.

Apprv.Desig.

Desig.Desig.

Desig.

Sheet

Title

Draw

No.

6/13

Date

DateDate

Date

Desi

nDesi

Desi

Descri

tion

Descri

tionDescri

tion

Descri

tion

Date

DateDate

Date

Multi C Executor for

FANUC Series16i/18i/21i-MODEL B

Specification

-76558E

04.09.10

S.ISOHATA

The following keys are customized in the slave application (MANUAL GUIDE i ) for the above-

mentioned function.

Please set not to overlap with the setting of following table when the MDI key is customized in

the master application.

If overlapping, it becomes impossible to input by the MDI key in the slave application (MANUAL

GUIDE i ) side.

Therefore, please be careful enough in using the customizing function.

・

・・

・MDI Key matrix of MANUAL GUIDE

MDI Key matrix of MANUAL GUIDE MDI Key matrix of MANUAL GUIDE

MDI Key matrix of MANUAL GUIDE i

(1) Key Code table of M Series full key(10 soft key) type

+0 +2 +4 +6 +8 +A +C +E

----+------+------+------+------+------+------+------+------

50 ￨ 30 D0 31 D1 32 D2 33 D3 34 D4 35 D5 36 D6 37 D7

60 ￨ 38 D8 39 D9 2D 2D 2E 2E 00 00 2F 2F 0A 0A 08 A8

70 ￨ 96 96 94 94 95 C5 0D 0D 9A 9A 84 84 88 B8 89 B9

80 ￨ E8 E8 E9 E9 EA EA EB EB EC EC ED ED EE EE EF EF

90 ￨ 8A 8A 8B 8B 8E 8E 8F 8F 46 5B 44 5D 48 26 42 20

A0 ￨ FF FF F0 F0 F1 F1 F2 F2 00 00 00 00 00 00 90 90

B0 ￨ F3 F3 F4 F4 F5 F5 F6 F6 F7 F7 F8 F8 F9 F9 FE FE

C0 ￨ 4F 28 4E 29 47 45 50 43 58 55 59 56 5A 57 51 3F

D0 ￨ 49 2C 4A 41 4B 40 52 52 4D 23 53 3D 54 2A 4C 2B

E0 ￨ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

(2) Key Code table of 81 full key(10 soft key:common for M/T series) type

+0 +2 +4 +6 +8 +A +C +E

----+------+------+------+------+------+------+------+------

60 ￨ 30 3D 31 D1 32 D2 33 D3 34 D4 35 D5 36 D6 37 D7

70 ￨ 38 D8 39 D9 2D 2B 2E 2C 00 00 00 00 0A 0A 08 A8

80 ￨ 96 96 94 94 95 C5 0D 0D 9A 9A 84 84 88 B8 89 B9

90 ￨ E8 E8 E9 E9 EA EA EB EB EC EC ED ED EE EE EF EF

A0 ￨ 8A 8A 8B 8B 8E 8E 8F 8F 46 25 44 23 48 26 42 22

B0 ￨ FF FF F0 F0 F1 F1 F2 F2 00 00 00 00 00 00 90 90

C0 ￨ F3 F3 F4 F4 F5 F5 F6 F6 F7 F7 F8 F8 F9 F9 FE FE

D0 ￨ 4F 3F 4E 4E 47 2A 50 3C 58 28 59 29 5A 40 51 3E

E0 ￨ 49 49 4A 27 4B 3A 52 52 4D 20 53 5C 54 54 4C 3B

F0 ￨ 41 21 43 2F 45 24 55 5F 56 5B 57 5D 00 00 00 00

100 ￨ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

110 ￨ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Contents Summary of Multi C Executor for FANUC Series16i/18i/21i-MODEL B Supplement to Manual

Page 1Multi C Executor for FANUC Series 16i 16 /18i /18 /21i /21 -MODEL B Specifications Multi C Executor for Title FANUC Series16i/18i/21i-MODEL B Specification Draw No. A-76558E Edit Date Design Description Sheet 1/13 Date 04.09.10 Desig. S.ISOHATA Apprv.
Page 21. Outline The program of C language executor is what integrates the libraries which provided by FANUC and the user's application program which is made by MTB and is stored in a single file (MEM file). This MEM file is loaded into the memory of CNC and executed under the management of the NC softwar
Page 3In the Multi C Executor, three application programs or less (MEM file which links the user application programs with the library) are built in. Three application programs are called the master application program and the slave Application program1,and slave application program 2 and distinguished. M
Page 4Master application ･･ Almost the same composition as usual user's application. When the slave application program does not exist, it operates as usual. There is a functional limitation when the slave application program exists. Slave application 1,2･･ Multi application software made by FANUC. (MANUA
Page 53.2 Restrictions Set and use following functions for the collision not to happen between application programs. (1) Setting for user screen Number. Be careful not to use the same number by the master application and the slave application. crt_setuserscrn Registration of screen number of user screen c
Page 6The following keys are customized in the slave application (MANUAL GUIDE i ) for the above- mentioned function. Please set not to overlap with the setting of following table when the MDI key is customized in the master application. If overlapping, it becomes impossible to input by the MDI key in the
Page 7(3) Key Code table of M Series small key(10 soft key) type +0 +2 +4 +6 +8 +A +C +E ----+------+------+------+------+------+------+------+------ 50 ￨ 30 30 31 31 32 32 33 33 34 34 35 35 36 36 37 37 60 ￨ 38 38 39 39 2D 2D 2E 2E 00 00 2F 2F 0A 0A 08 A8 70 ￨ 96 96 94 94 95 C5 0D 0D 9A 9A 84 84 88 B8 89
Page 84. Shared memory (1) DRAM variable Individual area is reserved for each application. These area for variable can not be accessed each other. (2) SRAM variable and SRAM disc Individual area is reserved for each application, and the area size for each application is set by parameter. These area for va
Page 9Appendix.1 Start up process of Multi C Executor system (1) Loading of MEM file ・Do the loading of each MEM file into FROM, for master application and slave application. They are stored in F-ROM as following NAME. Master application : CEX 1.0M, CEX 2.0M, CEX x.0M Slave application : CS1 1.0M, CS1 2.0
Page 10Appendix.2 User applica application tion for Multi C Executor It is necessary to change the user application of usual C Language Executor as follows to make it correspond to Multi C Executor. １ Items which must be changed in master application (user application) (1) C Language Library ・Compile, and
Page 11The flow of power ON process under the Multi C Executor environment is as follows, when the master application which corresponded the above-mentioned is used.. Master application Slave application Power ON Initialize Graphics Display TITLE （Hold） Initialize process at Power ON yes （Hold） Display TIT
Page 12２．Libraries to which ２．Libraries which are added for Multi C Executor ------------------------------------------------------------------------------ Switch of main Task
------------------------------------------------------------------------------ [Name] os_resm_slv [Format] unsigned short os
Page 13Appendix.3 Software Construction for Multi C Executor １） CNC system software This function is available in the following CNC series / edition. 16i-MB B0HA/16 or later 18i-MB BDHA/16 or later 18i-MB5 BDH5/06 or later 21i-MB DDHA/16 or later 16i-TB B1HA/22 or later 18i-TB BEHA/22 or later 21i-TB DEHA/