Fanuc C-Executer Operating Manual
B-62443EN-3/03E
- 1014 -
------------------------------------------------------------------------------
13. Select drawing method of 6x sized character. <Main>
------------------------------------------------------------------------------
[Name]
crt_set6chmode
[Syntax]
#include <crt.h>
int crt_set6chmode( int mode ) ;
[Arguments]
mode Drawing method of 6x sized character.
0: High speed mode
1: Complete mode
[Return]
0 Successful.
1 Invalid value (other than 0 and 1) is specified.
2 Ineffective in the current display mode.
[Description]
Selects drawing method of 6x sized character.
This function selects the drawing method of 6x sized character that
is displayed over "CNC screen display function" application program
on PC side of FS160i/180i/210i. Specify one of the followings.
mode = 0 High speed mode (default).
This is effective for displaying the
frequently updated information such as the
current position of NC using 6x sized
character. The character is updated without
flicker.
mode = 1 Complete mode.
Each elements of 6x sized character are
individually drawn.
Normally "High speed mode" of the default setting is used. Use
"Complete mode" in case of following.
* The text window displayed by "win_***" functions overlaps 6x sized
characters drawn over the base screen. In this case, any elements
of 6x sized character which adjoins the window border may not be
drawn correctly. To avoid this, select "Complete mode" by this
function.
This setting is not effective for NC side screen. 6x sized character
is always drawn by "Complete mode" on NC side screen.
Setting by this function is effective to all 6x sized character
drawing until terminating the current "CNC screen display function"
session.
Setting by this function is effective to drawing method of 6x sized
character on the text screen by "printf" function etc., not effective
to 6x sized character drawing by graphic functions.