Fanuc C-Executer Operating Manual
B-62443EN-3/03E
- 27 -
2.4 The hardwares of CNC which are used in C Executor
ITEM SPECIFICATION REMARKS
========================================================================
CPU i386 compatible processor It is common with CNC
software.
NUMERIC DATA none (16/18-B) [4]
PROCESSOR available (16/18-C, 16i/18i-A) [5]
------------------------------------------------------------------------
DRAM MAX 1, 2, 3 or 4MB Independent area from
CNC software is used.
One capacity must be
specified optionaly.
DRAM FOR USER 384 - 3456KB This is usable
APPLICATION capacity of previous
(*1) DRAM in the user app-
lication. Value up to
(DRAM capacity - 640KB)
is set in parameter.
------------------------------------------------------------------------
SRAM 64/256KB(option)
SRAM DISK MAX 63 or 255KB(option) Sum of SRAM disk and
non-volatile variables
NON-VOLATILE MAX 63/255KB(option) is up to
VARIABLES (SRAM capacity - 1KB).
------------------------------------------------------------------------
MEMORY CARD PCMCIA or JEIDA compatible Other cards than SRAM [5]
SRAM cards 256KB - 2MB card aren't supported [5]
Supporting MS-DOS format [5]
------------------------------------------------------------------------
F-ROM Available to store arbitrary Data size to store is [4]
data variable according to [4]
Application program can read F-ROM capacity, etc. [4]
stored data (Max: about 4MB) [4]
------------------------------------------------------------------------
MDI KEY Standard keyboard Key arrangement is [4]
or small keyboard custmizable. [4]
------------------------------------------------------------------------
TOUCH-PANEL 640x480 resolution "TOUCH-PANEL" option [5]
Reading status and position is required. [5]
------------------------------------------------------------------------