1. Fanuc
  2. The Memory Card for 30i Series, 16i Series, 0i Series, Power Mate i Series, 20i Series, 15i Series, and Data Server

The Memory Card for 30i Series, 16i Series, 0i Series, Power Mate i Series, 20i Series, 15i Series, and Data Server Additional Manual Page 1

Additional Manual
TECHNICAL REPORT (MANUAL) NO.TMN 05/036E
Date 28 Apr., 2005
General Manager of
CNC Laboratory
The memory card for 30i series, 16i series, 0i series,
Power Mate i series, 20i series, 15i series and Data Server
1. Communicate this report to:
Your information
GE Fanuc-N, GE Fanuc-E
FANUC Robotics
CINCINNATI MILACRON
Machine tool builder
Sales agency
End user
2. Summary for Sales Documents
3. Notice
4. Attached Document: Export Control ( Yes No )
Drawing No. A-80542EN Edition 01 (4 pages)
No.CLB1-05/4283
28 Apr., 2005
Order section of issuer of issue
ADE V.G.M. Manager Chief
Person in charge
Previous page
Next page

Contents Summary of The Memory Card for 30i Series, 16i Series, 0i Series, Power Mate i Series, 20i Series, 15i Series, and Data Server Additional Manual

  • Page 1TECHNICAL REPORT (MANUAL) NO.TMN 05/036E Date 28 Apr., 2005 General Manager of CNC Laboratory The memory card for 30i series, 16i series, 0i series, Power Mate i series, 20i series, 15i series and Data Server 1. Communicate this report to: Your information GE Fanuc-N, GE Fanuc-E FANUC Robotics CINCI
  • Page 2The memory card for 30i series, 16i series, 0i series, Power Mate i series, 20i series, 15i series and Data Server This document describes the recommended memory cards and matters that require attention in the following applied system. Applied system: • 30i series FANUC Series 30i/300i/300is/31i/310
  • Page 31. The recommended memory card Fanuc recommends the following ATA Flash card and Compact Flash card (CF card). Table 1-1. A list of the recommended memory card Purpose Specification Capacity DNC operation with Data Server *3 Remarks Data Input/Output memory card *2 100 Base 10 Base A02B-0281-K601 12
  • Page 42. Matters to be attended to operate DNC operation or Memory operation *3 with memory card in PCMCIA port *3: Memory operation with memory card corresponds only by FS30i series. When operating DNC operation or Memory operation with these CF cards, pay attention to the following matters. (1) In case
  • Page 5(3) On account of characteristics of the flash memory installed in CF card, in case of repeating to read the written data in CF card, a quality of the written data deteriorates, and as a result the data errors may be occurred. Even if such situation is occurred, these CF cards have the function that