1. Fanuc
  2. The Memory Card for 30i Series, 16i Series, 0i Series, Power Mate i Series, 20i Series, 15i Series, and Data Server

The Memory Card for 30i Series, 16i Series, 0i Series, Power Mate i Series, 20i Series, 15i Series, and Data Server Additional Manual Page 3

Additional Manual
Edit.
DATE Design
Description
DRAW. NO.
A-80542EN
CUST.
TITLE
SHEET
2 / 4
1. The recommended memory card
Fanuc recommends the following ATA Flash card and Compact Flash card (CF card).
Table 1-1. A list of the recommended memory card
Purpose
Data Server
*3
S
pecification
Capacity
Data Input/Output
DNC operation with
memory card
*2
100 Base 10 Base
Remarks
A02B-0281-K601 128MB
−
CF card
A02B-0213-K201 192MB
ATA Flash card
A02B-0213-K202 640MB
ATA Flash card
A02B-0213-K211 256MB
−
CF card
A02B-0213-K212 1GB
−
CF card
: Confirmed operation
− : FANUC does not recommend using the card because it might need much time to write data to it.
*2. Except for 160is/180is/210is-A/B, 0i/0i Mate-MODEL B, Power Mate i series and 20i series.
*3. Except for Power Mate i series and 20i series.
Fanuc uses CF card adapter (Fig. 1-1), SDCF-31-03 or SDAD-38-J60, made by SanDisk for confirming
the operation.
In case of 30i series, Fanuc uses CF card adapter (Fig. 1-2), A02B-0303-K150, made by FANUC for
confirming the operation.
Fig. 1-1) CF card adapter Fig. 1-2) CF card adapter for 30i series
Previous page
Next page

Contents Summary of The Memory Card for 30i Series, 16i Series, 0i Series, Power Mate i Series, 20i Series, 15i Series, and Data Server Additional Manual

  • Page 1TECHNICAL REPORT (MANUAL) NO.TMN 05/036E Date 28 Apr., 2005 General Manager of CNC Laboratory The memory card for 30i series, 16i series, 0i series, Power Mate i series, 20i series, 15i series and Data Server 1. Communicate this report to: Your information GE Fanuc-N, GE Fanuc-E FANUC Robotics CINCI
  • Page 2The memory card for 30i series, 16i series, 0i series, Power Mate i series, 20i series, 15i series and Data Server This document describes the recommended memory cards and matters that require attention in the following applied system. Applied system: • 30i series FANUC Series 30i/300i/300is/31i/310
  • Page 31. The recommended memory card Fanuc recommends the following ATA Flash card and Compact Flash card (CF card). Table 1-1. A list of the recommended memory card Purpose Specification Capacity DNC operation with Data Server *3 Remarks Data Input/Output memory card *2 100 Base 10 Base A02B-0281-K601 12
  • Page 42. Matters to be attended to operate DNC operation or Memory operation *3 with memory card in PCMCIA port *3: Memory operation with memory card corresponds only by FS30i series. When operating DNC operation or Memory operation with these CF cards, pay attention to the following matters. (1) In case
  • Page 5(3) On account of characteristics of the flash memory installed in CF card, in case of repeating to read the written data in CF card, a quality of the written data deteriorates, and as a result the data errors may be occurred. Even if such situation is occurred, these CF cards have the function that