1. Fanuc
  2. The Memory Card for 30i Series, 16i Series, 0i Series, Power Mate i Series, 20i Series, 15i Series, and Data Server

The Memory Card for 30i Series, 16i Series, 0i Series, Power Mate i Series, 20i Series, 15i Series, and Data Server Additional Manual Page 2

Additional Manual
Edit.
DATE Design
Description
DRAW. NO.
A-80542EN
CUST.
01 05/04/28
New issued
Ando
TITLE
The memory card for 30
i
series, 16
i
series, 0
i
series,
Power Mate
i
series, 20
i
series, 15
i
series, and Data
Server
SHEET
1 / 4
The memory card for 30i series, 16i series, 0i series,
Power Mate i series, 20i series, 15i series and Data Server
This document describes the recommended memory cards and matters that require attention in the
following applied system.
Applied system:
• 30i series
FANUC Series 30i/300i/300is/31i/310i/310is/32i/320i/320is-MODEL A
FANUC Series 31i/310i/310is-MODEL A5
• 16i series
FANUC Series 16i/160i/160is/18i/180i/180is/21i/210i/210is-MODEL A
*1
FANUC Series 16i/160i/160is/18i/180i/180is/21i/210i/210is-MODEL B
FANUC Series 18i/180i/180is-M MODEL B5
• 0i series
FANUC Series 0i/0i Mate-MODEL B
FANUC Series 0i/0i Mate-MODEL C
• Power Mate i series
Power Mate i-MODEL D
Power Mate i-MODEL H
• 20i series
FANUC Series 20i-MODEL A
FANUC Series 20i-MODEL B
• 15i series
FANUC Series 15i/150i -MODEL A
FANUC Series 15i/150i -MODEL B
• Data Server that used in above model.
*1. For the information of supported hardware versions and software editions of
using ATA card with 16i series MODEL A, please refer to the CONNECTION
MANUAL (HARDWARE) (B-63003).
Previous page
Next page

Contents Summary of The Memory Card for 30i Series, 16i Series, 0i Series, Power Mate i Series, 20i Series, 15i Series, and Data Server Additional Manual

  • Page 1TECHNICAL REPORT (MANUAL) NO.TMN 05/036E Date 28 Apr., 2005 General Manager of CNC Laboratory The memory card for 30i series, 16i series, 0i series, Power Mate i series, 20i series, 15i series and Data Server 1. Communicate this report to: Your information GE Fanuc-N, GE Fanuc-E FANUC Robotics CINCI
  • Page 2The memory card for 30i series, 16i series, 0i series, Power Mate i series, 20i series, 15i series and Data Server This document describes the recommended memory cards and matters that require attention in the following applied system. Applied system: • 30i series FANUC Series 30i/300i/300is/31i/310
  • Page 31. The recommended memory card Fanuc recommends the following ATA Flash card and Compact Flash card (CF card). Table 1-1. A list of the recommended memory card Purpose Specification Capacity DNC operation with Data Server *3 Remarks Data Input/Output memory card *2 100 Base 10 Base A02B-0281-K601 12
  • Page 42. Matters to be attended to operate DNC operation or Memory operation *3 with memory card in PCMCIA port *3: Memory operation with memory card corresponds only by FS30i series. When operating DNC operation or Memory operation with these CF cards, pay attention to the following matters. (1) In case
  • Page 5(3) On account of characteristics of the flash memory installed in CF card, in case of repeating to read the written data in CF card, a quality of the written data deteriorates, and as a result the data errors may be occurred. Even if such situation is occurred, these CF cards have the function that