1. Fanuc
  2. FS 16i/18i/21i/0i-Model B, Fanuc Standard Color Scheme Setting Function

FS 16i/18i/21i/0i-Model B, Fanuc Standard Color Scheme Setting Function Additional Manual Page 6

Additional Manual
3 Parameter
#7 #6 #5 #4 #3 #2 #1 #0
13101 ODC NDC
[Data type] Bit
ODC In the color LCD of FANUC Series 16i /18i /21i /0i – MODEL B, this
function:
0: does not change the color scheme (color palette value) of VGA screen display.
1: changes the color scheme (color palette value) of VGA screen display to
FANUC standard color scheme 2 (former FANUC standard color scheme).
NDC In the color LCD of FANUC Series 16i /18i /21i /0i – MODEL B, this
function:
0: does not change the color scheme (color palette value) of VGA screen display.
1: changes the color scheme (color palette value) of VGA screen display to
FANUC standard color scheme 1 (new FANUC standard color scheme).
When CNC is turned off and on again after parameter ODC is set to 1, parameter
ODC is automatically set to 0.
When CNC is turned off and on again after parameter NDC is set to 1, parameter
NDC is automatically set to 0.
When all standard color data parameters (No.6561 to No.6595) of COLOR1 are
set to 0, it is possible to change color scheme (color palette value) by setting
parameter ODC or NDC to 1.
In the multi path system, parameter No.13101 is used in common.
Parameter No.13101 does not exist in the loader side. The setting of main side is
used on the loader side too.
A-79019E
Sheet
Title
Draw
No.
Ed. Date Design Description
Date Jan.27.’03 Desig. Apprv.
FANUC Series 16i/18i/21i/0i – MODEL B
Specifications of
FANUC standard color scheme setting function
5/6
Previous page
Next page

Contents Summary of FS 16i/18i/21i/0i-Model B, Fanuc Standard Color Scheme Setting Function Additional Manual

  • Page 1TECHNICAL REPORT (MANUAL) No.TMN 03/015E Date : Feb. 17, 2003 General Manager of Software Development Center FANUC Series 16i/18i/21i/0i-MODEL B FANUC standard color scheme setting function 1. Communicate this report to: Your information only ○ GE Fanuc-N, GE Fanuc-E FANUC Robotics MILACRON ○ Machin
  • Page 2FANUC Series 16i / 18i / 21i / 0i – MODEL B Specifications of FANUC standard color scheme setting function Contents 1 Outline .................................................................................................................................2 2 Details..................................
  • Page 31 Outline In the color LCD of FANUC Series 16i /18i /21i /0i – MODEL B, this function changes the color scheme (color palette value) of VGA screen display to FANUC standard color scheme. When the parameter described later is set and CNC is turned off and on again, one of two kinds of FANUC standard
  • Page 42 Details 2.1 FANUC standard color scheme 1 (new FANUC standard color scheme) setting When all standard color data parameters (No.6561 to No.6595) of COLOR1 are set to 0, if the parameter NDC (No.13101#6) is set to 1 and CNC is turned off and on again, the color scheme (color palette value) is chang
  • Page 52.2 FANUC standard color scheme 2 (former FANUC standard color scheme) setting When all standard color data parameters (No.6561 to No.6595) of COLOR1 are set to 0, if the parameter ODC (No.13101#7) is set to 1 and CNC is turned off and on again, the color scheme (color palette value) is changed to F
  • Page 63 Parameter #7 #6 #5 #4 #3 #2 #1 #0 13101 ODC NDC [Data type] Bit ODC In the color LCD of FANUC Series 16i /18i /21i /0i – MODEL B, this function: 0: does not change the color scheme (color palette value) of VGA screen display. 1: changes the color scheme (color palette value) of VGA screen display
  • Page 74 Notes (1) This function is available on and after the following CNC ROM series / edition of FANUC Series 16i /18i /21i /0i – MODEL B. FS16i-TB B1HA-03(C) FS18i-TB BEHA-03(C) FS21i-TB DEHA-03(C) FS16i-MB B0HA-02(B) FS18i-MB BDHA-02(B) FS21i-MB DDHA-02(B) FS18i-MB5 BDH5-17(Q) FS0i-MB D4A1-03(C) FS0i