1. Fanuc
  2. FS 16i/18i/21i/0i-Model B, Fanuc Standard Color Scheme Setting Function

FS 16i/18i/21i/0i-Model B, Fanuc Standard Color Scheme Setting Function Additional Manual Page 7

Additional Manual
A-79019E
Sheet
Title
Draw
No.
Ed. Date Design Description
Date Jan.27.’03 Desig. Apprv.
FANUC Series 16i/18i/21i/0i – MODEL B
Specifications of
FANUC standard color scheme setting function
6/6
4 Notes
(1) This function is available on and after the following CNC ROM series /
edition of FANUC Series 16i /18i /21i /0i – MODEL B.
FS16i-TB B1HA-03(C)
FS18i-TB BEHA-03(C)
FS21i-TB DEHA-03(C)
FS16i-MB B0HA-02(B)
FS18i-MB BDHA-02(B)
FS21i-MB DDHA-02(B)
FS18i-MB5 BDH5-17(Q)
FS0i-MB D4A1-03(C)
FS0i-TB D6A1-03(C)
(2) This function is valid to also the screen made by Macro Executor. However
when the color scheme (color palette value) is set by Macro Executor
program (conversational macro program), it becomes valid.
(3) This function is invalid to the screen made by C Executor.
(4) In the multi path system, the color scheme setting is common in each path.
And the standard color data parameters (No.6561 to No.6595) of COLOR1
are used together.
(5) In compound machining function, the color scheme setting is different
between T-mode and M-mode. And the standard color data parameters
(No.6561 to No.6595) of COLOR1 are separately used by T-mode and
M-mode. Therefore, when the color scheme setting is changed, it is
necessary to confirm both parameters.
(6) In the following case, this function is invalid.
1) Monochrome LCD
2) Parameter NVG (No.3119#7) is set to 1.
3) Virtual MDI key
4) 8.4" color LCD of FANUC Series 0i – MODEL B
5) Display link
Previous page
Next page

Contents Summary of FS 16i/18i/21i/0i-Model B, Fanuc Standard Color Scheme Setting Function Additional Manual

  • Page 1TECHNICAL REPORT (MANUAL) No.TMN 03/015E Date : Feb. 17, 2003 General Manager of Software Development Center FANUC Series 16i/18i/21i/0i-MODEL B FANUC standard color scheme setting function 1. Communicate this report to: Your information only ○ GE Fanuc-N, GE Fanuc-E FANUC Robotics MILACRON ○ Machin
  • Page 2FANUC Series 16i / 18i / 21i / 0i – MODEL B Specifications of FANUC standard color scheme setting function Contents 1 Outline .................................................................................................................................2 2 Details..................................
  • Page 31 Outline In the color LCD of FANUC Series 16i /18i /21i /0i – MODEL B, this function changes the color scheme (color palette value) of VGA screen display to FANUC standard color scheme. When the parameter described later is set and CNC is turned off and on again, one of two kinds of FANUC standard
  • Page 42 Details 2.1 FANUC standard color scheme 1 (new FANUC standard color scheme) setting When all standard color data parameters (No.6561 to No.6595) of COLOR1 are set to 0, if the parameter NDC (No.13101#6) is set to 1 and CNC is turned off and on again, the color scheme (color palette value) is chang
  • Page 52.2 FANUC standard color scheme 2 (former FANUC standard color scheme) setting When all standard color data parameters (No.6561 to No.6595) of COLOR1 are set to 0, if the parameter ODC (No.13101#7) is set to 1 and CNC is turned off and on again, the color scheme (color palette value) is changed to F
  • Page 63 Parameter #7 #6 #5 #4 #3 #2 #1 #0 13101 ODC NDC [Data type] Bit ODC In the color LCD of FANUC Series 16i /18i /21i /0i – MODEL B, this function: 0: does not change the color scheme (color palette value) of VGA screen display. 1: changes the color scheme (color palette value) of VGA screen display
  • Page 74 Notes (1) This function is available on and after the following CNC ROM series / edition of FANUC Series 16i /18i /21i /0i – MODEL B. FS16i-TB B1HA-03(C) FS18i-TB BEHA-03(C) FS21i-TB DEHA-03(C) FS16i-MB B0HA-02(B) FS18i-MB BDHA-02(B) FS21i-MB DDHA-02(B) FS18i-MB5 BDH5-17(Q) FS0i-MB D4A1-03(C) FS0i