2003.6.30
1.6 Output to external device
Input/output to the external devices is possible by the [ALL I/O screen] or
[tool management screen] when the I/O device number is 4, 6.
Select to the <SYSTEM> screen and press soft key [ALL IO].
Press the continuous menu key some times until the above screen is
displayed.
To press the following key, tool management data are possible to
input/output.
• Soft key [LAYOUT] Customizing display data
• Soft key [P-NAME ] Name data of the spindle or the wait position
data
• Soft key [POINT ] Decimal point position data of customizing
data.
To output to an external device, the format for new registration is used.
To output to the memory card (I/O device number = 4), the following file
names is used.
‘DISPCSTM.DAT’ Customizing display data
‘POSNAME.DAT’ Name data of the spindle or the wait position
data
‘POINTPOS.DAT’ Decimal point position data of customizing
data
Edit
18/26
Data Signature
Description
FANUC Series 16i/18i/21i-MB/TB
Expansion Tool Management Function
A-79171
Drawing No.
Title
Page