Change of the DeviceNet board specification in FS16i/18i/21i/160i/180i/210i/160is/180is/210is-MODEL A/B and Power Mate i-MODEL D/H Additional Manual Page 4
Additional Manual
b) Power Mate i-MODEL D/H
Table 3
Item Old order specification New order specification
DeviceNet board Refer to Table 4.
Control software A02B-0259-J554#6570 A02B-0259-J554#6571
Application software A02B-0259-J553#6576
(No changed)
Since 04th edition.
Master function A02B-0259-J860 (No changed)
Slave function A02B-0259-J861 (No changed)
HIROSE HR31 contact A02B-0259-K211 (No changed)
Note ) Specify HIROSE HR31 contact for board B.
Table 4
Board
Old order
specification
New order
specification
New board number
slave board A02B-0259-J240 A02B-0259-J245 A20B-8100-0492
master board A02B-0259-J241 A02B-0259-J246 A20B-8100-0492
slave board B A02B-0259-J242 A02B-0259-J247 A20B-8100-0493
master board B A02B-0259-J243 A02B-0259-J248 A20B-8100-0493
Note ) Slave board C is not changed.
Edit. DATE Design
Description
DRAW. NO.
A-77221EN
CUST.
01 03/06/05
New issued
AJIMA
TITLE
Change of the DeviceNet board in FS16i/18i/21i/
160i/180i/210i/160is/180is/210is-MODEL A/B and
Power Mate i-D/H
SHEET
3 / 4
Contents Summary of Change of the DeviceNet board specification in FS16i/18i/21i/160i/180i/210i/160is/180is/210is-MODEL A/B and Power Mate i-MODEL D/H Additional Manual
- Page 1TECHNICAL REPORT (MANUAL) NO. TMN03/051E Date 10 Jun, 2003 General Manager of CNC Laboratory Change of the DeviceNet board specification in FS16i/18i/21i/160i/180i/210i/160is/180is/210is-MODEL A/B and Power Mate i-MODEL D/H 1. Communicate this report to : ○ Your information ○ GE Fanuc-N, GE Fanuc-E
- Page 2Change of DeviceNet board Abstract In FS16i/18i/21i/160i/180i/210i/160is/180is/210is-MODEL A/B and Power Mate i-MODEL D/H, FANUC will apply the new DeviceNet board because parts on the board is stopped manufacturing. It is necessary to change the order specification and board number. Please pay atte
- Page 33. Order specification for board Only board and software are changed. Other item and remarks on the Order List are not changed. a) FS16i/18i/21i/160i/180i/210i/160is/180is/210is-MODEL A/B Table 1 Old order Item New order specification Specification DeviceNet board Refer to Table 2. Control software
- Page 4b) Power Mate i-MODEL D/H Table 3 Item Old order specification New order specification DeviceNet board Refer to Table 4. Control software A02B-0259-J554#6570 A02B-0259-J554#6571 (No changed) Application software A02B-0259-J553#6576 Since 04th edition. Master function A02B-0259-J860 (No changed) Slav
- Page 54. Setting of parameter When the problem of excessive message traffic of the network occurs because new DeviceNet board was used, this problem can be avoided by adjusting the scanning interval of network. There is the item of “7 SCAN INTERVAL = “ on the DEVICENET MASTER SETTING screen to adjust the