B–63325EN/03
1. SCREEN INDICATIONS AND OPERATIONS
5
Use function selection keys to select items (functions).
Each item is further divided into subitems (chapters). Use a chapter
selection key to select the corresponding subitem (chapter).
To select a chapter, press the CHAPTER key to set the soft keys to a
chapter selection key state, and then press the desired chapter selection
key.
Alternatively, press a hardware function key repeatedly to change a
chapter selection.
The list of chapters included in each function is shown below.
POS
POSI-
TION
CHAP-
TER
Function key on the MDI panel
Soft keys
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
No. Chapter menu Description
(1) OVERALL Selects an overall position indication screen.
(2) RELATIVE Selects a relative position indication screen.
(3) ABSOLUTE Selects a position indication screen in a workpiece coordi-
nate system.
(4) MACHINE Selects a position indication screen in a machine coordinate
system.
(5) MANUALOVRLAP Selects an operation screen for performing an operation with
manual handle interruption.
(6) BLOCK RESTRT Selects an operation screen for restarting the operation from
the suspended block.
(7) PROGRAM-
RESTRT
Selects an operation screen for restarting the suspended
program operation.
(8) TOOL HEAD Indicates the absolute coordinates and the actual speed of
the tool head in tool direction handle feed, tool normal direc-
tion handle feed, and rotational handle feed around tool tip.
(9) HANDLEPULSE Indicates a handle–pulse interruption amount in three–di-
mensional handle feed.
1.1.5
Chapter Selection Keys
1.1.5.1
Position