B–63325EN/03
1. SCREEN INDICATIONS AND OPERATIONS
15
The diagnostic data 1500 to 1505 indicates serial–spindle information.
#7
SALMI1500
#6 #5
CALM
#4
CMER
#3
CER
#2
SNER
#1
FRER
#0
CRER
[Data type] Bit spindle type
Bit Name Internal state when “1” is indicated
#0 CRER A CRC error occurred (warning).
#1 FRER A framing error occurred (warning).
#2 SNER A transmission/receiving mate is wrong.
#3 CER A receiving error occurred.
#4 CMER A return is not received during automatic
scanning.
#5 CALM A communication alarm was generated in the
spindle amplifier.
#6 (Not used)
#7 SALMI A system alarm was generated in the spindle
amplifier.
1504 Torque data of spindle motor
[Data type] Integer spindle type
[Unit of data] %
1505 Speed data of spindle motor
[Data type] Integer spindle type
[Unit of data] min
–1
3000 Servo position error
[Data type] Integer axis type
[Unit of data] Detection unit
3001 Servo position error amount + FAD error amount
[Data type] Integer axis number
[Unit of data] Detection unit
Displays the sum of the servo position error and the number of FAD
accumulated pulses if fine acceleration/deceleration (FAD) is used.
D Serial spindle
D Servo position error